
Mouse stm32f2 with lat switches rev1
OpenPixel, a pcb based on stm32f215, usb3300 and paw3395
- Size
- 62.7 × 67.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 93
- Pads
- 307
- Tracks, vias
- 587, 108
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Aug 2025
- Updated
- 3 Sep 2025
Overview
Mouse stm32f2 with lat switches rev1 is an open-source printed circuit board by MilitisTemplarii, from the MilitisTemplarii/OpenPixel-STM32-Mouse-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 62.7 × 67.7 mm with 73 parts on 93 nets, routed with 587 tracks and 108 vias.
It is built around the USB3300-EZK, AP2112K-3.3 and TLV75519PDBV, with the SSSS213202 among its other parts. Its parts include 33 capacitors, 14 resistors, 4 ICs, 2 crystals and 1 connector. It belongs with the STM32 boards of this library.
Main components
4USB3300-EZK
QFN-32-EP(5x5)-40℃~+85℃ 3V~3.6V 54.7mA 83uA Controller USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB ConvertersAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedTLV75519PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 1.9V 25uA 400mV@(500mA) 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Soft Start、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSSSS213202
SMD-40℃~+85℃ 300mA 5.5mm 6V Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount,Vertical SMD Slide Switches ROHSALPSALPINESlide Switches
README
README.mdOpenPixel
Mouse-PCB-STM32-PAW3395
BOM file soon :D
This is a mouse pcb based on stm32f215, usb3300 and paw3395
NO CODE, FIRMWARE, SOFTWARE, ETC, just a pcb design for hobby.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C4, C30, C31, C33, C38, C39, C40, C41, C42, C43, C44, C46, C48, C49, C50 +4 |
| 5 | SW_SPDT_321 | Omron mouse switches:SW_D2FC_OMR | SW_LAT_BCK, SW_LAT_FR, SW_LEFT1, SW_RIGHT1, SW_WHEEL1 |
| 4 | 1 µF | Capacitor_SMD:C_0402_1005Metric | C24, C25, C28, C29 |
| 3 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R3, R7, R8 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C5, C7 |
| 2 | 100nf | Capacitor_SMD:C_0402_1005Metric | C45, C52 |
| 2 | 10 kΩ | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C26, C27 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R2, R6 |
| 2 | 4,7uF | Capacitor_SMD:C_0603_1608Metric | C3, C47 |
| 2 | SG-210SCD | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y2, Y3 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW_DPI1, SW1 |
| 1 | 100 Ω | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 12kΩ | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 220 Ω | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 330 Ω | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 5,6 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 820Ω | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | SW_LAT1 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_1.00mm:PinSocket_1x03_P1.00mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | debug1 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | USB1 |
| 1 | LED_dpi | LED_SMD:LED_RGB_1210 | LED_DPI1 |
| 1 | RotaryEncoder | Omron mouse switches:Encoder_Kailh_Wheel_3Pin | SCROLL1 |
| 1 | SSSS213202 | Sw_slide:SSSS213202_AAL | SW_POLLING1 |
| 1 | STM32F215RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_EVQP7C | SW2 |
| 1 | TLV75519PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB3300-EZK | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U5 |
| 1 | ~ | PAW3395:PAW3395_LGA16_fixed | PAW3395 |
The 69 most common of 73 parts.
Similar boards
- 4 layers310 × 123 mm

- 2 layers83 × 100 mm

- 2 layers120 × 80 mm

MainBoard v1
shimotoriharuki/2021RoboTrace_Kicad
This repository contains circuit data for line-following robot (UnderBird).
166 parts3GPL-3.0 - 2 layers99.6 × 49.8 mm

- 4 layers40.6 × 65.1 mm

RiscV MousePcb
MilitisTemplarii/OpenPixel-Risc-V-Mouse-PCB
Risc-V based PCB for high-end gaming mouse
56 parts2GPL-3.0 - 2 layers80 × 60 mm

Mecanum robot board
adammat02/mecanum_robot_board
A compact STM32-based controller board for a four-wheel mecanum robot. It drives four DC gear motors with quadrature-encoder feedback, reads two time-of-flight distance sensors, and breaks out the common serial buses -…
88 parts - 6 layers50 × 35 mm

- 2 layers60 × 60 mm

Questions
How big is the Mouse stm32f2 with lat switches rev1 PCB?
It measures 62.7 × 67.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mouse stm32f2 with lat switches rev1 use?
73 parts, built around the USB3300-EZK, AP2112K-3.3, TLV75519PDBV and SSSS213202. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mouse stm32f2 with lat switches rev1 KiCad files?
From the MilitisTemplarii/OpenPixel-STM32-Mouse-PCB repository on GitHub, at the commit this page was made from: the board is kicad/Pcb with lat switches/mouse stm32f2 with lat switches rev1.kicad_pcb and its schematic kicad/Pcb with lat switches/mouse stm32f2 with lat swiches rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mouse stm32f2 with lat switches rev1 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).