

Robotrace
- Size
- 50 × 35 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 160
- Pads
- 490
- Tracks, vias
- 994, 279
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2026
- Updated
- 7 Jul 2026
Overview
Robotrace is an open-source printed circuit board by fTomo-robot, from the fTomo-robot/Robotrace repository on GitHub. It is a 6-layer board of 50 × 35 mm with 112 parts on 160 nets, routed with 994 tracks and 279 vias.
It is built around the MIC4606-2YML-TR, NJW1933F1-AT-TE2 and ICM-42688-P, with the WS2812B, BSS138 and SSSS213202 among its other parts. Its parts include 41 capacitors, 19 resistors, 14 connectors, 11 diodes and 11 transistors. It belongs with the STM32 boards of this library.
Main components
7MIC4606-2YML-TR
VQFN-16-EP(4x4)-40℃~+125℃ 1A 1A 200uA 20ns 20ns 35ns 35ns 4 5.25V~16V Full-Bridge MOSFET Under Voltage Protection、Short Circuit Protection VQFN-16-EP(4x4) Gate Drivers ROHSMicrochip TechnologyGate DriversNJW1933F1-AT-TE2
SOT-23-6-40℃~+105℃ 1 1.25V~40V 2.2mA 4.5V~40V 500kHz 600mA Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHSNisshinbo Micro Devices Inc.DC-DC ConvertersICM-42688-P
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 7.5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps Motion Event Detection, Synchronization, Timestamp Support LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometersWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsSSSS213202
SMD-40℃~+85℃ 300mA 5.5mm 6V Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount,Vertical SMD Slide Switches ROHSALPSALPINESlide SwitchesSISS27DN
PowerPAK1212-8S-50℃~+150℃ 1 P-Channel 2.2V 30V 4.6mΩ@10V 485pF 5.25nF 50A 530pF 57W 92nC@10V P-Channel PowerPAK1212-8S MOSFETs ROHSVishay IntertechnologyMOSFETs
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C1, C10, C11, C12, C13, C14, C15, C16, C17, C18, C20, C21, C22, C23, C24, C25 +5 |
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R7, R8, R9, R10, R11, R13, R16, R17, R18, R19 |
| 9 | Q_NMOS_SSSGD_AvalancheRated | Package_SO:Vishay_PowerPAK_1212-8_Single | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q11 |
| 6 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C8, C34, C36, C39 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric | C28, C29, C30, C31, C32 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C37, C38, C40, C41 |
| 4 | Conn_01x01_Pin | ViaPad:ViaPad_D2.0mm_Drill1.0mm | J9, J10, J11, J12 |
| 4 | WS2812B | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D3, D6, D8, D9 |
| 3 | 40V1A | Diode_SMD:D_SOD-123F | D1, D10, D11 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C2, C4 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_1.5x1.5mm | J13, J14 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J6, J7 |
| 2 | FerriteBead | Capacitor_SMD:C_0603_1608Metric | FB1, FB2 |
| 2 | MIC4606-2YML-TR | MIC-4606:QFN65P400X400X90-17N-D | IC2, IC3 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 22uH | Inductor_SMD:L_Taiyo-Yuden_MD-4040 | L1 |
| 1 | 330u | Capacitor_SMD:CP_Elec_8x6.9 | C26 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R12 |
| 1 | 39k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 4.7 | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | BOOT0 | SKRPACE010:SW_SKRPACE010 | S2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_Murata_PKMCS0909E | BZ1 |
| 1 | ICM-42688-P | ICM-42688-P:PQFN50P300X250X97-14N | U3 |
| 1 | LED_1 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED_2 | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | LED_3 | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LED_4 | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | LINE | 5051101892:CON_5051101892_MOL | J1 |
| 1 | NJW1933F1-AT-TE2 | Package_TO_SOT_SMD:SOT-23-6 | IC1 |
| 1 | RESET | SKRPACE010:SW_SKRPACE010 | S3 |
| 1 | SSSS213202 | SSSS213202:SSSS213202 | S5 |
| 1 | STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J5 |
| 1 | STM32F469VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SW1 | SKRPACE010:SW_SKRPACE010 | S1 |
| 1 | SW2 | SKRPACE010:SW_SKRPACE010 | S4 |
| 1 | SiSS27DN | Package_SO:Vishay_PowerPAK_1212-8_Single | Q10 |
| 1 | Side_L | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J4 |
| 1 | Side_R | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J3 |
| 1 | TLV70233_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
| 1 | VIN | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J8 |
More from fTomo-robot/Robotrace
1- 2 layers116.8 × 70 mm

Similar boards
- 2 layers50 × 90 mm

- 2 layers30 × 30 mm

- 4 layers65 × 56 mm

- 4 layers61 × 71 mm

Hardware challenge
alienware-sa/harness_tester_challenge
Harness Tester Challenge Leaderboard · comma.ai/jobs · Discord · X
25 partsMIT - 2 layers100 × 100 mm

- 4 layers38.5 × 38.5 mm

FCV3 project
iamneerajverma001/FLIGHT-CONTROLLER-PUSHPAK--2026
Download PCB ZIP · One-click download Open Portfolio App · One-click interactive project summary
78 parts1MIT - 4 layers68 × 75 mm

- 2 layers83 × 100 mm

Questions
How big is the Robotrace PCB?
It measures 50 × 35 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Robotrace use?
112 parts, built around the MIC4606-2YML-TR, NJW1933F1-AT-TE2, ICM-42688-P and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robotrace KiCad files?
From the fTomo-robot/Robotrace repository on GitHub, at the commit this page was made from: the board is Robotrace/Robotrace.kicad_pcb and its schematic LineBoard/LineBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robotrace design in my own project?
Its repository states no licence, so its author keeps all rights: ask fTomo-robot before reusing the design.