RiscV Mouse LatSW
MilitisTemplarii/OpenPixel-Risc-V-Mouse-PCB
Risc-V based PCB for high-end gaming mouse
Risc-V based PCB for high-end gaming mouse
RiscV MousePcb is an open-source printed circuit board by MilitisTemplarii, from the MilitisTemplarii/OpenPixel-Risc-V-Mouse-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 40.6 × 65.1 mm with 56 parts on 72 nets, routed with 352 tracks and 112 vias.
It is built around the TPD2EUSB30DRT, MIC5219-3.3YM5 and SSSS213202. Its parts include 22 capacitors, 6 resistors, 6 ICs, 1 connector and 1 crystal. It belongs with the RISC-V boards of this library.
Risc-V (CH32V305) based PCB for high-end gaming mouse
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7, C8, C11, C13, C15, C16, C17, C18, C19, C20, C22 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C12 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C14, C21 |
| 3 | SW_SPDT_321 | Omron mouse switches:SW_D2FC_OMR | SW_LEFT1, SW_RGTH1, SW_WHEEL1 |
| 3 | TPD2EUSB30 | Package_TO_SOT_SMD:Texas_DRT-3 | U4, U5, U6 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_TL3342 | BOOT1, SW_DPI1 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 5,6K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 8MHZ_CMOS | Oscillator:Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y1 |
| 1 | CH32V30xRxTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | SW_LAT1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal | USB1 |
| 1 | LED_BGRK | LED_SMD:LED_RGB_1210 | LED_DPI1 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RotaryEncoder | Omron mouse switches:Encoder_Kailh_Wheel_3Pin | WHEEL_ENCODER1 |
| 1 | S1 | PAW3395:PAW3395_LGA16_fixed | PAW3395 |
| 1 | SSSS213202 | Sw_slide:SSSS213202_AAL | POLLING1 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_EVQP7C | RST1 |
| 1 | TLV70019_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
The 48 most common of 56 parts.
MilitisTemplarii/OpenPixel-Risc-V-Mouse-PCB
Risc-V based PCB for high-end gaming mouse


shimotoriharuki/2021RoboTrace_Kicad
This repository contains circuit data for line-following robot (UnderBird).

MilitisTemplarii/OpenPixel-STM32-Mouse-PCB
OpenPixel, a pcb based on stm32f215, usb3300 and paw3395

adammat02/mecanum_robot_board
A compact STM32-based controller board for a four-wheel mecanum robot. It drives four DC gear motors with quadrature-encoder feedback, reads two time-of-flight distance sensors, and breaks out the common serial buses -…



It measures 40.6 × 65.1 mm and has 4 copper layers, 1.6 mm thick.
56 parts, built around the TPD2EUSB30DRT, MIC5219-3.3YM5 and SSSS213202. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MilitisTemplarii/OpenPixel-Risc-V-Mouse-PCB repository on GitHub, at the commit this page was made from: the board is KiCad/RiscV_MousePcb.kicad_pcb and its schematic KiCad/RiscV_MousePcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).