

MCU Datalogger
PCB Layout Design
- Size
- 49.5 × 32.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 34
- Pads
- 117
- Tracks, vias
- 274, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Sep 2025
- Updated
- 4 Sep 2025
Overview
MCU Datalogger is an open-source printed circuit board by MichelleMaia, from the MichelleMaia/PCB repository on GitHub, published under the MIT licence. It is a 4-layer board of 49.5 × 32.3 mm with 30 parts on 34 nets, routed with 274 tracks and 33 vias.
It is built around the ATMEGA328P-AU and 24LC1025-I/P. Its parts include 7 resistors, 5 capacitors, 4 ICs, 4 connectors and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)24LC1025-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
README
README.mdPCB
PCB Layout Design
Author: Michelle Cavalcanti Maia
This repository showcases a collection of PCB layout designs along with their respective circuit schematics.
All projects were created using KiCad as part of the course KiCad Like a Pro 3E.
Projects
- LED Torch – a simple lighting circuit
- Breadboard Power Supply – regulated power supply for prototyping
- Tiny Solar Power Supply – compact solar-powered circuit
- MCU Datalogger – microcontroller-based data logging system
Tools
- KiCad – open-source PCB design software
About
I am passionate about embedded systems, electronics, and PCB design.
For more projects and articles, visit my website: michellemaia.com
📅 Last updated: September 2025
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R6 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 24LC1025 | digikey-footprints:SOIC-8_W5.3mm | U1, U3 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric | R5, R7 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 16 MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y2 |
| 1 | 32.768 KHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | ATMEGA328P-AU | ATMEGA328P-AU:QFP80P900X900X120-32N | U4 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | Conn_01x09_Pin | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | DS1337STR | DS1337STR:21-0041B_8 | U2 |
The 29 most common of 30 parts.
More from MichelleMaia/PCB
2- 2 layers38.2 × 19.7 mm

- 2 layers63.6 × 25.1 mm

Similar boards
- 2 layers50.2 × 31.2 mm

MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers42.7 × 24.4 mm

BACEE
futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.
20 parts19MIT - 4 layers49.3 × 34.1 mm

Dattalogger Board
DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
30 parts4 - 2 layers55.7 × 37.2 mm

- 2 layers41.4 × 27.7 mm

- 4 layers50 × 30 mm

Datalogger v1
GildardoRestrepo/course_electronics_design
Repositorio de actividades entregables del curso de diseño electrónico. UPB 2026-02
35 parts1MIT - 2 layers52.2 × 34.4 mm

MCU DataLoggerPCB
lologog/MCU_DataLogger
A microcontroller-based device for logging and storing data from external sensors. The data is saved to EEPROM memory for later retrieval and analysis
30 parts1MIT - 2 layers51.4 × 38.7 mm

Questions
How big is the MCU Datalogger PCB?
It measures 49.5 × 32.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MCU Datalogger use?
30 parts, built around the ATMEGA328P-AU and 24LC1025-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCU Datalogger KiCad files?
From the MichelleMaia/PCB repository on GitHub, at the commit this page was made from: the board is MCU Datalogger/MCU Datalogger.kicad_pcb and its schematic Breadboard Power Supply/Breadboard Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCU Datalogger design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).