Skip to the content
2 layers71.2 × 27.2 mmLEDTorch, the printed circuit board in 3D

.

Size
71.2 × 27.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
4
Pads
11
Tracks, vias
27, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Sep 2026
Updated
27 Sep 2026

Overview

LEDTorch is an open-source printed circuit board by Merenylmz, from the Merenylmz/PCBDesignes repository on GitHub. It is a 2-layer board of 71.2 × 27.2 mm with 6 parts on 4 nets, routed with 27 tracks and 0 vias.

It is built around the CR2032. Its parts include 1 resistor, 1 diode and 1 switch.

Main components

1

Parts

6
QtyValueFootprintReferences
1CR2032Battery:BatteryHolder_Keystone_1058_1x2032BT1
1LEDLED_THT:LED_D5.0mmD1
1RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1
1SW_DPDT_x2Button_Switch_THT:Push_E-Switch_KS01Q01SW1

The 4 most common of 6 parts.

Similar boards

  • 2 layers333.4 × 149.9 mmOmega Mainboard, the printed circuit board in 3D

    Omega Mainboard

    skiselev/omega

    Omega Home Computer

    248 parts459GPL-3.0
  • 2 layers17.2 × 30.4 mmWeigand, the printed circuit board in 3D

    Weigand

    linklayer/BLEKey

    A Bluetooth Low Energy device for interfacing with Wiegand

    17 parts268
  • 4 layers188 × 188 mmITX Llama, the printed circuit board in 3D

    ITX Llama

    eivindbohler/itxllama

    422 parts246GPL-3.0
  • 2 layers61 × 36.8 mmKeebcard, the printed circuit board in 3D

    Keebcard

    rsheldiii/Keebcard

    Home of the KeebCard project - Kicad files, code, and more!

    15 parts112
  • 2 layers59.2 × 41 mmBluey, the printed circuit board in 3D

    Bluey

    electronut/ElectronutLabs-bluey

    Nordic nRF52832 BLE development board with sensors.

    79 parts96
  • 2 layers35 × 35 mmQron0b, the printed circuit board in 3D

    Qron0b

    qewer33/qron0b

    a sleek and low-power binary wristwatch

    35 parts62GPL-3.0
  • 2 layers90 × 89.4 mm38-04-usb sleuth, the printed circuit board in 3D

    38-04-usb sleuth

    smaroukis/usb-sleuth

    USB cable continuity tester ++

    68 parts61
  • 2 layers170.2 × 100 mmZ80-SBC, the printed circuit board in 3D

    Z80-SBC

    skiselev/zeta_sbc

    Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware

    75 parts53GPL-3.0

Questions

How big is the LEDTorch PCB?

It measures 71.2 × 27.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LEDTorch use?

6 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LEDTorch KiCad files?

From the Merenylmz/PCBDesignes repository on GitHub, at the commit this page was made from: the board is LEDTorch/LEDTorch.kicad_pcb and its schematic FirstProject/FirstProject.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LEDTorch design in my own project?

Its repository states no licence, so its author keeps all rights: ask Merenylmz before reusing the design.