2 layers42 × 67 mm
2 layers149.9 × 119.4 mm
Rp keyboard
MatrixSenpai/rasle-kb1- Size
- 149.9 × 119.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 129
- Nets
- 123
- Pads
- 913
- Tracks, vias
- 1,670, 291
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Jun 2023
- Updated
- 8 Jun 2026
Overview
Rp keyboard is an open-source printed circuit board by MatrixSenpai, from the MatrixSenpai/rasle-kb repository on GitHub. It is a 2-layer board of 149.9 × 119.4 mm with 129 parts on 123 nets, routed with 1,670 tracks and 291 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 29 diodes, 29 switches, 18 capacitors, 9 resistors and 4 ICs. It belongs with the keyboards and input boards and the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
Parts
129| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | KB_D | reversible_parts:D_SOD-123 Reversible | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +13 |
| 29 | KB_SW | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_Choc_V1V2_1.00u Reversible | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +13 |
| 29 | SK6182 | reversible_parts:LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount Reversible | BD1, BD2, BD10, BD11, BD12, BD13, BD14, BD15, BD16, BD17, BD18, BD19, BD20, BD21, BD22, BD23 +13 |
| 12 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C5, C6, C7, C8, C9, C10, C12, C13, C14, C17, C18 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | LH1, LH2, LH3, LH4 |
| 3 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R5 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C11 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R9 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal | J3 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_SPST_SKQG_WithStem | PSW1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | DIAG_HDR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | DSP_HDR | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | MCP23017x-x-ML | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U4 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | RST | Button_Switch_SMD:SW_SPST_SKQG_WithStem | PSW2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
Similar boards
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
Questions
How big is the Rp keyboard PCB?
It measures 149.9 × 119.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rp keyboard use?
129 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rp keyboard KiCad files?
From the MatrixSenpai/rasle-kb repository on GitHub, at the commit this page was made from: the board is rp-keyboard.kicad_pcb and its schematic keys.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rp keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask MatrixSenpai before reusing the design.