
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Arduinoを使用し、UART信号を受信し、それをOLEDに表示すると同時に、XIAO(ESP32C3)を使用してBLEで送信します。
Uart2oled ble is an open-source printed circuit board by MasaoC, from the MasaoC/uart2ble_oled repository on GitHub, published under the MIT licence. It is a 2-layer board of 43 × 24 mm with 10 parts on 23 nets, routed with 91 tracks and 9 vias.
It is built around the R-78E5.0-0.5. Its parts include 6 resistors, 2 ICs and 2 connectors. It belongs with the radio and wireless and lEDs and displays boards and the SAM D and SAM boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R5 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | Out OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U2 |
| 1 | Seeed Studio XIAO SAMD21 | Seeed Studio XIAO Series Library:XIAO-SAMD21-RP2040-14P-2.54-21X17.8MM (Seeeduino XIAO) | U1 |
| 1 | Socket Input XH | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J1 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.



emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.

Rodemfr/MicronetToNMEA
A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !

BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
It measures 43 × 24 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the R-78E5.0-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MasaoC/uart2ble_oled repository on GitHub, at the commit this page was made from: the board is kicad-data/uart2oled-ble.kicad_pcb and its schematic kicad-data/uart2oled-ble.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).