Skip to the content
2 layersGluco calibration, the printed circuit board in 3D

Destinado a criação de um equipamento médico funcional para leitura da saturação de glicose do corpo

Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
51
Pads
132
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
29 May 2024
Updated
7 Nov 2024

Overview

Gluco calibration is an open-source printed circuit board by Martins-Lucaas, from the Martins-Lucaas/IB2-project repository on GitHub. It is a 2-layer board with 28 parts on 51 nets.

It is built around the MCP602-I/P, BC337 and BPW34. Its parts include 12 resistors, 5 capacitors, 4 connectors, 3 diodes and 2 ICs.

Main components

3

Parts

28
QtyValueFootprintReferences
4Conn_01x15Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_VerticalJ1, J2, J3, J4
310KRResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR4, R5, R11
21.8KRResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR6, R8
2100RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR7, R9
210uFCapacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mmC1, C2
21uFCapacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mmC4, C5
2BC337Package_TO_SOT_THT:TO-92_InlineQ1, Q2
11.5KRResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR12
110kRResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR10
1150RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1220RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR3
122KRResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2
122uFCapacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mmC3
1BPW34OptoDevice:Osram_DIL2_4.3x4.65mm_P5.08mmD4
1MCP6002-xMCPackage_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mmU1
1MCP602Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mmU2
1MTE8120CP 805nmLED_THT:LED_D3.0mm_IRGreyD2
1MTE8120CP 805nmLED_THT:LED_D3.0mm_ClearD3

Similar boards

  • 2 layers68.3 × 94.9 mmLaser Gate, the printed circuit board in 3D

    Laser Gate

    purvanyaTyagi/Laser-Gate

    This repository contains the firmware and hardware design files for a laser gate detection system.

    40 parts
  • 2 layers82.1 × 82.1 mmUncut Gem, the printed circuit board in 3D

    Uncut Gem

    QuantumVillage/UncutGem

    A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

    207 parts210AGPL-3.0
  • 2 layers90 × 55 mmSemiconductorRadioactivityDetector, the printed circuit board in 3D

    SemiconductorRadioactivityDetector

    RobertGawron/SemiconductorRadioactivityDetector

    Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

    43 parts29GPL-3.0
  • 2 layers76.5 × 55.7 mmVive sensors smd 4x4panel, the printed circuit board in 3D

    Vive sensors smd 4x4panel

    Roboy/HTC_Vive_Sensors

    Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

    614 parts23
  • 2 layers97.2 × 55.9 mmMjs pcb, the printed circuit board in 3D

    Mjs pcb

    meetjestad/mjs_pcb

    This repository contains various versions of the sensor station PCB used by Meetjestad.

    83 parts6
  • 2 layers49.5 × 42.5 mmGeiger, the printed circuit board in 3D

    Geiger

    SyrianSpock/open-geiger-counter

    PIN diode based Geiger counter

    44 parts6
  • 2 layers100 × 100 mmPhotodiode lab, the printed circuit board in 3D

    Photodiode lab

    fborello-lambda/pcbs_llm_driven_design

    🔌 PCBs made with LLMs

    31 parts1MIT

Questions

What parts does the Gluco calibration use?

28 parts, built around the MCP602-I/P, BC337 and BPW34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gluco calibration KiCad files?

From the Martins-Lucaas/IB2-project repository on GitHub, at the commit this page was made from: the board is Elétrica/Glicosímetro para cablibração/gluco_calibration/gluco_calibration.kicad_pcb and its schematic Elétrica/Glicosímetro para cablibração/gluco_calibration/gluco_calibration.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gluco calibration design in my own project?

Its repository states no licence, so its author keeps all rights: ask Martins-Lucaas before reusing the design.