Skip to the content
12

BPW34

Vishay IntertechnologyExtended

-40℃~+100℃ 215mW 2nA 430nm~1100nm 60V 900nm ±65° 插件,P=5.1mm Photodiodes ROHS

Part id
vishay/BPW34
Category
Photodiodes
Package
插件,P=5.1mm
Pins
2
In stock
19,790 at JLCPCB (C85128)
Used on
47 open-source boards

Overview

The BPW34 is a photodiode made by Vishay Intertechnology in a 插件,P=5.1mm package with 2 pins. -40℃~+100℃ 215mW 2nA 430nm~1100nm 60V 900nm ±65° 插件,P=5.1mm Photodiodes ROHS.

PCBKit's library has its KiCad symbol (Sensor_Optical:BPW34, from KiCad's library) and its footprint (OptoDevice:Osram_DIL2_4.3x4.65mm_P5.08mm, from KiCad's library), ready for a KiCad board. 19,790 are in stock at JLCPCB (part C85128). 47 open-source boards in 36 repositories on GitHub use it.

Symbol

Sensor_Optical:BPW34From KiCad's library

Footprint

12
OptoDevice:Osram_DIL2_4.3x4.65mm_P5.08mmFrom KiCad's library

From the datasheet

6
Reverse voltage, most
60 V · maximum reverse voltage · p. 1
Works from
-40 °C · minimum operating ambient temperature · p. 1
Works up to
100 °C · maximum operating ambient temperature · p. 1
Junction, hottest
100 °C · maximum junction temperature · p. 1
Junction to air (leaded)
350 K/W · junction to ambient, connected with Cu wire, 0.14 mm2 · p. 1
Edge
100 ns · typical rise time, VR = 10 V, RL = 1 kΩ, λ = 820 nm · p. 2

What it is and has

7
Device type
Silicon PIN Photodiode · p. 1
Package type
leaded · p. 1
Package form
top view · p. 1
Dimensions
5.4 x 4.3 x 3.2 mm · p. 1
Radiant sensitive area
7.5 mm2 · p. 1
Spectral sensitivity
visible and near infrared radiation · p. 1
Angle of half sensitivity
± 65° · p. 1

Specifications

21
ParameterConditionsAs printedPage
Reverse voltage VRTamb = 25 °Cmax 60 V1
Power dissipation PVTamb ≤ 25 °Cmax 215 mW1
Junction temperature TjTamb = 25 °Cmax 100 °C1
Operating temperature range Tambmin -40 · max 100 °C1
Storage temperature range Tstgmin -40 · max 100 °C1
Soldering temperature Tsdt≤3smax 260 °C1
Thermal resistance junction/ambient RthJAConnected with Cu wire, 0.14 mm2max 350 K/W1
Breakdown voltage V(BR)Tamb = 25 °C; IR = 100 uA, E = 0min 60 V2
Reverse dark current IroTamb = 25 °C; VR = 10 V, E = 0typ 2 · max 30 nA2
Diode capacitance CDTamb = 25 °C; VR = 0 V, f = 1 MHz, E = 0typ 70 pF2
Diode capacitance CDTamb = 25 °C; VR = 3 V, f = 1 MHz, E = 0typ 25 · max 40 pF2
Open circuit voltage VoTamb = 25 °C; Ee = 1 mW/cm2, λ = 950 nmtyp 350 mV2
Temperature coefficient of Vo TKVoTamb = 25 °C; Ee = 1 mW/cm2, λ = 950 nmtyp -2.6 mV/K2
Short circuit current IkTamb = 25 °C; EA = 1 klxtyp 70 uA2
Short circuit current IkTamb = 25 °C; Ee = 1 mW/cm2, λ = 950 nmtyp 47 uA2
Temperature coefficient of Ik TKIkTamb = 25 °C; Ee = 1 mW/cm2, λ = 950 nmtyp 0.1 %/K2
Reverse light current IraTamb = 25 °C; EA = 1 klx, VR = 5 Vtyp 75 uA2
Reverse light current IraTamb = 25 °C; Ee = 1 mW/cm2, λ = 950 nm, VR = 5 Vmin 40 · typ 50 uA2
Wavelength of peak sensitivity λpTamb = 25 °Ctyp 900 nm2
Rise time trTamb = 25 °C; VR = 10 V, RL = 1 kΩ, λ = 820 nmtyp 100 ns2
Fall time tfTamb = 25 °C; VR = 10 V, RL = 1 kΩ, λ = 820 nmtyp 100 ns2

Ordering codes, by the datasheet

2
BPW34
leaded, top view · Bulk; MOQ: 3000 pcs, 3000 pcs/bulk · p. 1
BPW34S
leaded, top view · Tube; MOQ: 1800 pcs, 45 pcs/tube · p. 1

Open-source boards using it

47See all 47
  • 2 layers82.1 × 82.1 mmUncut Gem, the printed circuit board in 3D

    Uncut Gem

    QuantumVillage/UncutGem

    A prototype Full Stack fully Open Source NV Center Diamond Magnetometer

    207 parts210AGPL-3.0
  • 2 layers90 × 55 mmSemiconductorRadioactivityDetector, the printed circuit board in 3D

    SemiconductorRadioactivityDetector

    RobertGawron/SemiconductorRadioactivityDetector

    Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

    43 parts29GPL-3.0
  • 2 layers76.5 × 55.7 mmVive sensors smd 4x4panel, the printed circuit board in 3D

    Vive sensors smd 4x4panel

    Roboy/HTC_Vive_Sensors

    Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

    614 parts23
  • 2 layers97.2 × 55.9 mmMjs pcb, the printed circuit board in 3D

    Mjs pcb

    meetjestad/mjs_pcb

    This repository contains various versions of the sensor station PCB used by Meetjestad.

    83 parts6
  • 2 layers49.5 × 42.5 mmGeiger, the printed circuit board in 3D

    Geiger

    SyrianSpock/open-geiger-counter

    PIN diode based Geiger counter

    44 parts6
  • 2 layers100 × 100 mmPhotodiode lab, the printed circuit board in 3D

    Photodiode lab

    fborello-lambda/pcbs_llm_driven_design

    🔌 PCBs made with LLMs

    31 parts1MIT
  • 2 layers37 × 36 mmMaoRad, the printed circuit board in 3D

    MaoRad

    Maobuff/MaoRad

    Gamma radiation detector

    24 parts1MIT

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the BPW34?

Yes. The symbol is Sensor_Optical:BPW34 and the footprint OptoDevice:Osram_DIL2_4.3x4.65mm_P5.08mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BPW34?

插件,P=5.1mm, with 2 pins. Its footprint is drawn on this page.

Where is the BPW34 datasheet?

Vishay Intertechnology publishes it: the Datasheet link on this page opens it.

Where can I order the BPW34?

JLCPCB lists it as part C85128, with 19,790 in stock; the sellers' links on this page open their listings.

What can replace the BPW34?

Parts like it in the library: the BPW34S by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BPW34?

47 boards in 36 repositories on GitHub; the most starred are listed on this page, with their KiCad files.