
Vive sensors smd 9x7 panel
Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.
Vive sensors smd 4x4panel is an open-source printed circuit board by Roboy, from the Roboy/HTC_Vive_Sensors repository on GitHub. It is a 2-layer board of 76.5 × 55.7 mm with 614 parts on 20 nets, routed with 2,832 tracks and 224 vias.
It is built around the TLV4316ID and BPW34. Its parts include 320 resistors, 160 capacitors, 48 diodes and 16 ICs. It belongs with the sensors and measurement boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 112 | 100k | Resistors_SMD:R_0402_NoSilk | R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14 +96 |
| 96 | 1k | Resistors_SMD:R_0402_NoSilk | R17, R17, R17, R17, R17, R17, R17, R17, R17, R17, R17, R17, R17, R17, R17, R17 +80 |
| 80 | 100n | Capacitors_SMD:C_0402_NoSilk | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +64 |
| 48 | 10k | Resistors_SMD:R_0402_NoSilk | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +32 |
| 48 | 1u | Capacitors_SMD:C_0402_NoSilk | C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6, C6 +32 |
| 32 | 10p | Capacitors_SMD:C_0402_NoSilk | C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4, C4 +16 |
| 32 | 22k | Resistors_SMD:R_0402_NoSilk | R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12, R12 +16 |
| 32 | 4.7k | Resistors_SMD:R_0402_NoSilk | R13, R13, R13, R13, R13, R13, R13, R13, R13, R13, R13, R13, R13, R13, R13, R13 +16 |
| 16 | 5V | custom_lib:SolderWirePad_single_SMD_1.5x3mm | 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V, 5V |
| 16 | BPW34 | Opto-Devices:PhotoDiode_SMD-DIL2_4.5x4 | D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2 |
| 16 | D_GND | custom_lib:SolderWirePad_single_SMD_1.5x3mm | DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND, DGND |
| 16 | GND | custom_lib:SolderWirePad_single_SMD_1.5x3mm | GND, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND, GND |
| 16 | Pwr_LED | LEDs:LED_0603 | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 |
| 16 | Sgn | custom_lib:SolderWirePad_single_SMD_1.5x3mm | SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN, SGN |
| 16 | Sgn_LED | LEDs:LED_0603 | D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3 |
| 16 | TLV4316 | Housings_SSOP:TSSOP-14_4.4x5mm_Pitch0.65mm | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
| 6 | Fiducial_1mm_Dia_2.54mm_Outer_CopperBottom | Fiducials:Fiducial_1mm_Dia_2.54mm_Outer_CopperBottom | FID1, FID1_B, FID2, FID2_B, FID3, FID3_B |

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.

Roboy/HTC_Vive_Sensors
Schematics and PCB designs for our custom Vive sensors based on a quad op-amp chip rather than discrete transistors.



QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
RobertGawron/SemiconductorRadioactivityDetector
Nuclear radiation sensor with photodiode as a detector. Photodiode doesn't require high voltages as GM tubes do. Smaller size makes better resolution. Side effect is electronic must be more sensitive.

meetjestad/mjs_pcb
This repository contains various versions of the sensor station PCB used by Meetjestad.



It measures 76.5 × 55.7 mm and has 2 copper layers, 1 mm thick.
614 parts, built around the TLV4316ID and BPW34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Roboy/HTC_Vive_Sensors repository on GitHub, at the commit this page was made from: the board is V0.3/Vive_sensors_smd_4x4panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Roboy before reusing the design.