MITEVT/opel_velocity_interface1MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
Final outline is an open-source printed circuit board by MITEVT, from the MITEVT/opel_velocity_interface repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.5 × 75 mm with 58 parts on 80 nets, routed with 505 tracks and 81 vias.
It is built around the MCP2551-I/SN, LM358 and LM311N, with the ZSR1000GTA among its other parts. Its parts include 18 resistors, 13 capacitors, 12 diodes, 7 ICs and 4 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
NXP LPC11C14 Cortex-M0 Microcontroller
Takes user input in the form of key switches, level toggles, and button presses to activate main power distribution system and control auxilairy peripherals such as lights.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistors_SMD:R_0603_HandSoldering | R301, R302, R303, R304, R305, R306, R307, R308 |
| 8 | LED | LEDs:LED_0805 | D300, D301, D302, D303, D304, D305, D306, D307 |
| 5 | 0.1uF | Capacitors_SMD:C_0603_HandSoldering | C401, C403, C405, C601, C602 |
| 4 | 10μ | Capacitors_SMD:C_0805_HandSoldering | C501, C503, C505, C507 |
| 4 | CUS08F30H3FCT-ND | Diodes_SMD:SOD-323 | D601, D602, D603, D604 |
| 3 | .1μ | Capacitors_SMD:C_0603_HandSoldering | C502, C504, C506 |
| 3 | 1k | Resistors_SMD:R_0603_HandSoldering | R603, R604, R606 |
| 3 | TEST_1P | MITEVT_TP:smd_test_pad | W01, W02, W03 |
| 2 | 100k | Resistors_SMD:R_0603_HandSoldering | R601, R602 |
| 2 | 10k | Resistors_SMD:R_0603_HandSoldering | R401, R402 |
| 1 | 120 | Resistors_SMD:R_0603_HandSoldering | R201 |
| 1 | 1uF | Capacitors_SMD:C_0603_HandSoldering | C603 |
| 1 | 20k | Capacitors_SMD:C_0603_HandSoldering | R1 |
| 1 | 87k | Resistors_SMD:R_0603_HandSoldering | R605 |
| 1 | CANCONNECTOR | MITEVT_AUTOMOTIVECON:776280-1 | P001 |
| 1 | CONN_01X14 | MITEVT_AUTOMOTIVECON:776267-1 | P002 |
| 1 | DEBUG_LED | Connectors_Molex:Molex_Microfit3_Header_02x08_Angled_43045-160x | P101 |
| 1 | ISP | Connectors_Molex:Molex_Microfit3_Header_02x03_Angled_43045-060x | P100 |
| 1 | LM311N | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U602 |
| 1 | LM358 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U601 |
| 1 | LPC11C14 | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U403 |
| 1 | MCP1755-33 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U501 |
| 1 | MCP1755-5 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U502 |
| 1 | MCP2551-I/SN | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U402 |
| 1 | TEST | Measurement_Points:Test_Point_2Pads | W04 |
| 1 | Zsr1000gta | TO_SOT_Packages_SMD:SOT-223 | U503 |
MITEVT/opel_velocity_interface
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
MITEVT/opel_velocity_interface
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
MITEVT/opel_driver_interface
MIT EVT's Opel GT Project Driver Interface Module. Acts as an inteface between the user and the electrical system for controlling power distribution and auxiliary peripherals.
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
dirkjankrijnders/lnet-iface-hub
Modular hub/frontpanel/microcontroller interface PCB's
It measures 99.5 × 75 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the MCP2551-I/SN, LM358, LM311N and ZSR1000GTA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MITEVT/opel_velocity_interface repository on GitHub, at the commit this page was made from: the board is final_board/final_outline.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).