

THT BuckConverter
A small PCB of a DC-DC THT Buck-Converter!
- Size
- 68.6 × 30.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 6
- Pads
- 35
- Tracks, vias
- 53, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 30 Mar 2022
- Updated
- 1 Apr 2022
Overview
THT BuckConverter is an open-source printed circuit board by LoZioo, from the LoZioo/THT-BuckConverter repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 30.5 mm with 19 parts on 6 nets, routed with 53 tracks and 0 vias.
It is built around the LM2596S-ADJ. Its parts include 4 capacitors, 2 resistors, 2 diodes, 2 connectors and 1 IC. It belongs with the power boards of this library.
Main components
1README
README.mdTHT-BuckConverter
A small PCB of a DC-DC Buck-Converter based on the famous LM2596 IC entirely built with just THT components!
PCB 3D front render

PCB 3D back render

Schematics

Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | .1uF | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C4 |
| 2 | GND | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | IN-, OUT- |
| 1 | 100uF 50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | ADJ |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 220uF 35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 47uH | Inductor_THT:L_Toroid_Vertical_L21.6mm_W9.1mm_P8.40mm_Bourns_5700 | L1 |
| 1 | IN | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | IN+ |
| 1 | IN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | D2 |
| 1 | LM2596S-ADJ | Package_TO_SOT_THT:TO-220-5_Horizontal_TabDown | U1 |
| 1 | LOGO | Logo:UniCT Back | G*** |
| 1 | LOGO | Logo:logo | G*** |
| 1 | OUT | TestPoint:TestPoint_THTPad_4.0x4.0mm_Drill2.0mm | OUT+ |
| 1 | OUT | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
Similar boards
- 2 layers90 × 53.4 mm

- 2 layers78.7 × 58.4 mm

- 2 layers40 × 60 mm

Scaner v1
Aleksei327/ESP32-C5-OBD2-Scanner
DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.
34 parts2 - 2 layers85.1 × 99.1 mm

- 2 layers105.6 × 72 mm

Solar mppt charge controller
Pendu1699/solar-mppt-charge-controller
ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.
25 parts2MIT - 2 layers100 × 100 mm

- 2 layers67.1 × 48.1 mm

- 6 layers100.5 × 101.5 mm

Custom ESC
0BitsnBytes/McQueen
an overpowered rc car that poses a danger to my safety :)
192 parts1GPL-3.0
Questions
How big is the THT BuckConverter PCB?
It measures 68.6 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the THT BuckConverter use?
19 parts, built around the LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the THT BuckConverter KiCad files?
From the LoZioo/THT-BuckConverter repository on GitHub, at the commit this page was made from: the board is Kicad-PCB/THT-BuckConverter.kicad_pcb and its schematic Kicad-PCB/THT-BuckConverter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the THT BuckConverter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).