Skip to the content
2 layers20.1 × 12.4 mmPsneev8, the printed circuit board in 3D

Small compact PCB for PSneev8

Size
20.1 × 12.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
28
Pads
55
Tracks, vias
109, 19
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
7 Mar 2024
Updated
13 Mar 2024

Overview

Psneev8 is an open-source printed circuit board by LGSGaming, from the LGSGaming/psneev8PCB repository on GitHub. It is a 2-layer board of 20.1 × 12.4 mm with 20 parts on 28 nets, routed with 109 tracks and 19 vias.

It is built around the ATMEGA328P-AU. Its parts include 1 capacitor, 1 resistor, 1 IC and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

PSnee V8 PCB

Compact PCB designed for PSnee v8 code by postal2201. Firmware can be found here. Treat project as in beta as PCB has not been tested yet. Manufacture at your own risk.

Contributing

Pull requests are welcome

Parts

20
QtyValueFootprintReferences
1100nfCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1
110kResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1
116mhzCrystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mmY1
13.5TestPoint:TestPoint_Pad_1.0x1.0mmTP1
1ATmega328P-APackage_QFP:TQFP-32_7x7mm_P0.8mmU1
1AXTestPoint:TestPoint_Pad_1.0x1.0mmTP4
1AYTestPoint:TestPoint_Pad_1.0x1.0mmTP9
1DTestPoint:TestPoint_Pad_1.0x1.0mmTP7
1DXTestPoint:TestPoint_Pad_1.0x1.0mmTP3
1GTestPoint:TestPoint_Pad_1.0x1.0mmTP2
1MISOTestPoint:TestPoint_Pad_1.0x1.0mmTP15
1MOSITestPoint:TestPoint_Pad_1.0x1.0mmTP14
1RSTTestPoint:TestPoint_Pad_1.0x1.0mmTP10
1RXDTestPoint:TestPoint_Pad_1.0x1.0mmTP11
1SCKTestPoint:TestPoint_Pad_1.0x1.0mmTP13
1SQTestPoint:TestPoint_Pad_1.0x1.0mmTP5
1SUTestPoint:TestPoint_Pad_1.0x1.0mmTP6
1TXDTestPoint:TestPoint_Pad_1.0x1.0mmTP12
1WTestPoint:TestPoint_Pad_1.0x1.0mmTP8

The 19 most common of 20 parts.

Similar boards

  • 2 layers50.5 × 128.5 mmOpenThereminV45, the printed circuit board in 3D

    OpenThereminV45

    GaudiLabs/OpenThereminV4

    Open Source Theremin Instrument

    107 parts249GPL-3.0
  • 2 layers152 × 88 mmRFBitBangSMT, the printed circuit board in 3D

    RFBitBangSMT

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    271 parts222
  • 2 layers50.2 × 31.2 mmMCU Datalogger, the printed circuit board in 3D

    MCU Datalogger

    futureshocked/KLP4e_MCU-Datalogger

    This is the repository for the "MCU Datalogger" project.

    31 parts138MIT
  • 2 layers34 × 46 mmNfcemu, the printed circuit board in 3D

    Nfcemu

    solosky/nfc-emu

    NFC模拟器

    58 parts117Apache-2.0
  • 2 layers73 × 94 mmSportiduino base, the printed circuit board in 3D

    Sportiduino base

    sportiduino/sportiduino

    Electronic timing system for orienteering and similar outdoor sports events on Arduino

    119 parts78GPL-3.0
  • 2 layers58.9 × 44.2 mmOpenPSX2AmigaPadAdapter, the printed circuit board in 3D

    OpenPSX2AmigaPadAdapter

    SukkoPera/OpenPSX2AmigaPadAdapter

    Playstation to Commodore Amiga/CD32 Controller Adapter

    43 parts69
  • 2 layers60 × 50 mmVx8 gps prototype v2.0, the printed circuit board in 3D

    Vx8 gps prototype v2.0

    4x1md/vx8_gps

    DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.

    56 parts66MIT

Questions

How big is the Psneev8 PCB?

It measures 20.1 × 12.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Psneev8 use?

20 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Psneev8 KiCad files?

From the LGSGaming/psneev8PCB repository on GitHub, at the commit this page was made from: the board is board/psneev8.kicad_pcb and its schematic schematic/psneev8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Psneev8 design in my own project?

Its repository states no licence, so its author keeps all rights: ask LGSGaming before reusing the design.