
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A stable LED stripe PCB with a separate trace for a button.
GlowLEDsPCB is an open-source printed circuit board by LEDs-by-glowingkitty, from the LEDs-by-glowingkitty/GlowStripe repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 10 × 250 mm with 43 parts on 19 nets, routed with 281 tracks and 39 vias.
It is built around the WS2812B. Its parts include 15 capacitors, 15 diodes and 2 ICs.

A stable LED stripe PCB with a separate trace for a button.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 15 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 6 | LOGO | LOGO | designedby, leddirectionarrow4, leddirectionarrow4, leddirectionarrow4, leddirectionarrow4, qrcode |
| 4 | Castellated_hole | myparts:Castellated hole | H1, H2, H3, H4 |
| 2 | Contact pads | myparts:LED strip connector 4pad small | U1, U2 |
| 1 | OSHW-Logo2_7.3x6mm_SilkScreen | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | OSHW logo |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 10 × 250 mm and has 2 copper layers, 1.69 mm thick.
43 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LEDs-by-glowingkitty/GlowStripe repository on GitHub, at the commit this page was made from: the board is GlowLEDsPCB.kicad_pcb and its schematic GlowLEDsPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).