

Nauglamir
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 32
- Pads
- 192
- Tracks, vias
- 1,042, 82
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20190516)
- Created
- 2 Jun 2019
- Updated
- 13 Apr 2024
Overview
Nauglamir is an open-source printed circuit board by Kreyl, from the Kreyl/Nauglamir repository on GitHub. It is a 4-layer board with 69 parts on 32 nets, routed with 1,042 tracks and 82 vias.
It is built around the MMA8452QT. Its parts include 28 capacitors, 14 resistors, 4 diodes, 4 inductors and 1 transistor. It belongs with the STM32 boards of this library.
Main components
1Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 22u | Capacitors:CAP_0603_Silks | C10, C11, C12, C13, C18, C19, C20, C21, C22, C23, C24, C25 |
| 10 | 0.1u | Capacitors:CAP_0603_Silks | C2, C4, C5, C6, C8, C9, C26, C27, C28, C29 |
| 8 | HOLE_METALLED | PCB:Hole2d2_out3d5mm | HOLE1, HOLE2, HOLE3, HOLE4, HOLE5, HOLE6, HOLE7, HOLE8 |
| 7 | 100k | Resistors:RES_0603 | R1, R2, R3, R7, R8, R9, R10 |
| 4 | 0R33 | Resistors:RES_1206 | R11, R12, R13, R14 |
| 4 | 1u | Capacitors:CAP_0603_Silks | C14, C15, C16, C17 |
| 4 | 2.2uH | Inductors:IND_SRN2512 | L1, L2, L3, L4 |
| 4 | LED | LEDs:Cree_J3030 | D1, D2, D3, D4 |
| 4 | ST1CC40_SO8 | SO_DIL_TSSOP:SO8_150MIL | DA2, DA3, DA4, DA5 |
| 3 | 10k | Resistors:RES_0603 | R4, R5, R6 |
| 2 | 10u | Capacitors:CAP_0603_Silks | C1, C7 |
| 2 | CONN_2 | Connectors:PBS-2 | XL2, XL3 |
| 1 | 2N7002 | SOT:SOT23-3 | Q1 |
| 1 | CONN_6 | Connectors:PLS-6 | XL1 |
| 1 | MCP1700 | SOT:SOT23-3A | DA1 |
| 1 | MMA8452Q | QFN_DFN:QFN16_5x3 | DD2 |
| 1 | STM32F030F6Px | SO_DIL_TSSOP:TSSOP20 | DD1 |
Similar boards
- 2 layers95.2 × 154.5 mm

- 2 layers30 × 30 mm

- 4 layers30 × 50 mm

Wireless logger
bnahill/wireless_logger
A compact wireless inertial logging and processing hardware platform
155 parts7 - 2 layers63.7 × 89.4 mm

Swadge devkit
AEFeinstein/Super-2020-Swadge-HW
The hardware for a hardware badge (Swadge) for Magfest 2020
69 parts6GPL-3.0 - 2 layers100.1 × 100.1 mm

- 4 layers50.5 × 80 mm

- 2 layers310 × 60 mm

- 2 layers50 × 50 mm

Heart rate monitor
jkravanja/heart_rate_monitor
Heart rate monitor designed in KiCad, using Nordic NRF51822 bluetooth module and TI AFE4400 heart rate module.
232 parts2
Questions
What parts does the Nauglamir use?
69 parts, built around the MMA8452QT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nauglamir KiCad files?
From the Kreyl/Nauglamir repository on GitHub, at the commit this page was made from: the board is Nauglamir_hw/Nauglamir.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nauglamir design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.