
PumpMotherboard
Kitsune-Robotics/RackDistribution-4U
This repo contains all the firmware and hardware for the RackDistribution-4U. If you're looking for the latest docs/builds, see our Releases Page.

This repo contains all the firmware and hardware for the RackDistribution-4U. If you're looking for the latest docs/builds, see our Releases Page.
LightPanel is an open-source printed circuit board by Kitsune-Robotics, from the Kitsune-Robotics/RackDistribution-4U repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 86.4 × 91.4 mm with 25 parts on 20 nets, routed with 97 tracks and 16 vias.
It is built around the WS2812B. Its parts include 16 diodes and 1 connector.

This repo contains all the firmware and hardware for the RackDistribution-4U. If you're looking for the latest docs/builds, see our Releases Page.
First, clone this repo (and optionally checkout a branch)
git clone https://github.com/Kitsune-Robotics/RackDistribution-4U.git
cd RackDistribution-4USome libraries and resources are included as submodules, run the following command to initialize them before opening the main sch
(If you get a missing library error, make sure to do this)
git submodule update --init --recursiveIf you want to use this project template for yourself, you can find it here!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 1 | BoardToBoard | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LOGO | KenwoodFox:KITSUNE_LOGO | G*** |
| 1 | LOGO | Tirga:TirgaBrain | G*** |
The 23 most common of 25 parts.

Kitsune-Robotics/RackDistribution-4U
This repo contains all the firmware and hardware for the RackDistribution-4U. If you're looking for the latest docs/builds, see our Releases Page.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 86.4 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kitsune-Robotics/RackDistribution-4U repository on GitHub, at the commit this page was made from: the board is Hardware/LightPanel/LightPanel.kicad_pcb and its schematic Hardware/LightPanel/LightPanel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).