

Shen
- Size
- 21 × 51 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 74
- Pads
- 320
- Tracks, vias
- 547, 79
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 Aug 2026
- Updated
- 21 Aug 2026
Overview
Shen is an open-source printed circuit board by Keyaan-07, from the Keyaan-07/shen repository on GitHub. It is a 4-layer board of 21 × 51 mm with 47 parts on 74 nets, routed with 547 tracks and 79 vias.
It is built around the RP2350A and W25Q32JVZPIQ. Its parts include 19 capacitors, 14 resistors, 4 ICs, 4 connectors and 2 switches. It belongs with the RP2350 boards of this library.
Main components
2RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH
README
README.mdSHEN
Shen is a low-cost pico-sized RP2350A development board along with the raspberry pi RM2, in a small 21mmx51mm form factor, with USB-C support. It is a 4 layer stackup with 1.0mm thickness.
Check out the PCB online on KiCanvas
Features
- WiFi and Bluetooth support
- dual-core
- 4MiB Flash storage(expandable upto 16MiB)
- User-LED
- High efficiency sychronous buck converter
- USB Boot
- Curvy Traces

BOM
Some parts(such as those in quantities of 50 and 100) are chosen because of the MOQ.
Name
Shen is taken from the chinese letter '参' which primarily means "to participate," "to join," "to take part in,"
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0201_0603Metric | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C18, C20 |
| 4 | 1k | Resistor_SMD:R_0201_0603Metric | R5, R6, R7, R8 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R10, R12 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C17, C19 |
| 2 | 22p | Capacitor_SMD:C_0201_0603Metric | C15, C16 |
| 2 | 27 | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | 5.1k | Resistor_SMD:R_0201_0603Metric | R13, R14 |
| 2 | Conn_01x20_Pin | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1, J2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW1, SW2 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1K | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 1u | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 3.3u | easyeda2kicad:IND-SMD_L2.0-W1.6_AOTA-B201610S3R3-101-T | L1 |
| 1 | 33 | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 470 | Resistor_SMD:R_0201_0603Metric | R11 |
| 1 | 63.4k | Resistor_SMD:R_0201_0603Metric | R9 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | RP2350A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U1 |
| 1 | RPI-RM2 | easyeda2kicad:RPI_RM2 | U3 |
| 1 | TLV62084DSGx | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J4 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |
Similar boards
- 2 layers78 × 78 mm

- 4 layers26 × 55 mm

Deezplay RP2350
zeankundev/boards
A collection and an archive of KiCad projects I made. Contains projects from 2023 - 2024.
71 parts1 - 4 layers50 × 22.9 mm

- 2 layers43 × 43 mm

- 4 layers42.5 × 32 mm

- 4 layers162.2 × 100 mm

- 4 layers43 × 43 mm

- 2 layers142.7 × 72 mm

Blinky bowtie
joshajohnson/bsidescbr2021
Slides and Design Files for BSides Canberra 2021
101 parts5GPL-3.0
Questions
How big is the Shen PCB?
It measures 21 × 51 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Shen use?
47 parts, built around the RP2350A and W25Q32JVZPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shen KiCad files?
From the Keyaan-07/shen repository on GitHub, at the commit this page was made from: the board is hardware/shen.kicad_pcb and its schematic hardware/shen.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shen design in my own project?
Its repository states no licence, so its author keeps all rights: ask Keyaan-07 before reusing the design.