Skip to the content
2 layers54.9 × 44.6 mmEDDDial, the printed circuit board in 3D
Size
54.9 × 44.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
81
Pads
224
Tracks, vias
420, 120
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Dec 2025
Updated
20 Mar 2026

Overview

EDDDial is an open-source printed circuit board by Kev1n8088, from the Kev1n8088/EDDDial repository on GitHub. It is a 2-layer board of 54.9 × 44.6 mm with 51 parts on 81 nets, routed with 420 tracks and 120 vias.

It is built around the MDBT50Q-1MV2 and BQ25185DLHR. Its parts include 16 resistors, 12 capacitors, 5 ICs, 5 connectors and 2 diodes. It belongs with the nRF52 and nRF5x boards of this library.

Main components

2

Parts

51
QtyValueFootprintReferences
7MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadH1, H2, H3, H4, H5, H6, H7
44.7kResistor_SMD:R_0402_1005MetricR4, R5, R8, R13
30.1uFCapacitor_SMD:C_0402_1005MetricC6, C9, C10
34.7uFCapacitor_SMD:C_0402_1005MetricC2, C5, C11
210kResistor_SMD:R_0402_1005MetricR6, R7
210uFCapacitor_SMD:C_0402_1005MetricC4, C13
212pFCapacitor_SMD:C_0402_1005MetricC7, C8
21ufCapacitor_SMD:C_0402_1005MetricC1, C3
222Resistor_SMD:R_0402_1005MetricR9, R10
25.1kResistor_SMD:R_0402_1005MetricR1, R2
256kResistor_SMD:R_0402_1005MetricR11, R14
2Conn_01x05_MountingPinConnector_JST:JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_HorizontalJ4, J5
2LEDLED_SMD:LED_0603_1608MetricD2, D3
11.2kResistor_SMD:R_0402_1005MetricR15
1100kResistor_SMD:R_0402_1005MetricR12
118kResistor_SMD:R_0402_1005MetricR16
132.768khzCrystal:Crystal_SMD_2012-2Pin_2.0x1.2mmY2
14.7RResistor_SMD:R_0805_2012MetricR3
1BQ25185DLHRFCU2025Lib:IC_BQ25185DLHRU1
1Conn_01x03_MountingPinConnector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_HorizontalJ2
1Conn_ARM_SWD_TagConnect_TC2030-NLConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ3
1MDBT50Q-1MV2RF_Module:Raytac_MDBT50QU2
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxGSW2
1SW_SPDTButton_Switch_THT:SW_E-Switch_EG1271_SPDTSW1
1TMAG5173A1QDBVRQ1Package_TO_SOT_SMD:SOT-23-6U5
1TPS7A02DBVPackage_TO_SOT_SMD:TSOT-23-5U4
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_GCT_USB4110J1
1VAL**Panelization:mouse-bite-2.54mm-slotmouse-bite-2.54mm-slot
1WE-TVS-82400102Package_TO_SOT_SMD:SOT-23-6U3

Similar boards

  • 4 layers24 × 42 mmAura a03, the printed circuit board in 3D

    Aura a03

    Avinash1286/pendent

    AURA: open wearable note-taking device development — PCB, printable case, firmware, Next.js/Convex notes, interactive 3D site and launch film.

    61 parts
  • 2 layersAirtag, the printed circuit board in 3D

    Airtag

    Circuit-Digest/DIY-AirTag

    32 parts41
  • 4 layers72 × 75 mmNrf52480 Dev board, the printed circuit board in 3D

    Nrf52480 Dev board

    brendena/Nordic_Pebble_Steel

    The goal of this project is to replace the main motherboard in the pebble steel with newer parts. Specifically the cpu will be a Nordic NRF52840.

    75 parts9
  • 4 layers38 × 74 mmTympan Rev F, the printed circuit board in 3D

    Tympan Rev F

    Tympan/Tympan_Rev_F_Hardware

    Tympan Rev F Hardware Design Files

    91 parts7CERN-OHL-P-2.0
  • 2 layers142.9 × 80.2 mmBifrost left, the printed circuit board in 3D

    Bifrost left

    hringdrifi/bifrost

    KiCad source files for the left half of Bifrǫst.

    66 parts5CERN-OHL-P-2.0
  • 2 layers409.5 × 137 mmKeyboard, the printed circuit board in 3D

    Keyboard

    GlassyBridge/Keyboard

    Keyboard

    373 parts2MIT
  • 4 layers36 × 36 mmJRWatch, the printed circuit board in 3D

    JRWatch

    jadenrhee/JRWatch

    Low-power BLE wearable: nRF52840 module + nPM1300 PMIC + BMI270 IMU + Sharp MIP display. 36 mm 4-layer board, ~15 µA projected sleep current, Zephyr firmware.

    47 parts2
  • 4 layers50 × 16 mmSystem board, the printed circuit board in 3D

    System board

    proegssilb/lightsaber-hardware

    PCBs and other files for lightsaber soundboard hardware.

    72 parts2CERN-OHL-S-2.0

Questions

How big is the EDDDial PCB?

It measures 54.9 × 44.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EDDDial use?

51 parts, built around the MDBT50Q-1MV2 and BQ25185DLHR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EDDDial KiCad files?

From the Kev1n8088/EDDDial repository on GitHub, at the commit this page was made from: the board is EDDDial.kicad_pcb and its schematic EDDDial.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the EDDDial design in my own project?

Its repository states no licence, so its author keeps all rights: ask Kev1n8088 before reusing the design.