Skip to the content
2 layers35.5 × 10.7 mmCAN Gauge, the printed circuit board in 3D

STM32F042 based gauge for rusEFI

Size
35.5 × 10.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
77
Nets
61
Pads
229
Tracks, vias
451, 66
Pours
6
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Aug 2021
Updated
10 Apr 2022

Overview

CAN Gauge is an open-source printed circuit board by Keith-N, from the Keith-N/STM-CAN-Gauge repository on GitHub. It is a 2-layer board of 35.5 × 10.7 mm with 77 parts on 61 nets, routed with 451 tracks and 66 vias.

It is built around the SN65HVD230D, UG-2864HSWEG01 and SS16HE3_B/I. Its parts include 23 resistors, 16 capacitors, 14 diodes, 4 ICs and 2 connectors. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

STM-CAN-Gauge

An STM32F042 based CAN gauge for use with rusEFI ECUs.
CAN is configured for 500k with a base ID of 512.
Input voltage tested at 5V and 12V.

Flash 'CAN Gauge.bin' through STM32CubeProgrammer using STLink and TC2030.

The only required connections for operation are supply voltage/ground and CAN High/Low.

GaugeC_Front GaugeC_Back

Pinout from the back of connector. Pinout

Parts

77
QtyValueFootprintReferences
1110kResistor_SMD:R_0402_1005MetricR1, R3, R10, R11, R12, R13, R14, R15, R24, R25, R26
111kResistor_SMD:R_0402_1005MetricR2, R7, R8, R9, R16, R17, R18, R19, R21, R29, R30
11LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11
8TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8
51uCapacitor_SMD:C_0402_1005MetricC2, C4, C14, C15, C17
40.1uCapacitor_SMD:C_0402_1005MetricC1, C3, C5, C13
4MountingHoleMountingHole:MountingHole_2mmH1, H2, H3, H4
3SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2, JP3
20Capacitor_SMD:C_0402_1005MetricC7, C8
210uInductor_SMD:L_1206_3216MetricC9, C10
22.2uCapacitor_SMD:C_0402_1005MetricC16, C18
1100uHInductor_SMD:L_0805_2012MetricL1
1120Resistor_SMD:R_0402_1005MetricR20
1120uCapacitor_SMD:C_1206_3216MetricC11
11N5817Diode_SMD:D_SOD-123D12
12594Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
130Inductor_SMD:L_0402_1005MetricL2
1Conn_01x08Connector_Molex:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_VerticalJ2
1Conn_02x03_Odd_EvenConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ1
1SMBJ16CD-M3/HDiode_SMD:D_SMBD22
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1SS16HE3_B/IDiode_SMD:D_SMAD21
1STM32F042K6TxPackage_QFP:LQFP-32_7x7mm_P0.8mmU1
1SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW1
1UG-2864HSWEG01custom:SSH1106_BottomU4

Similar boards

  • 2 layers32.1 × 37.5 mmSafewise, the printed circuit board in 3D

    Safewise

    coinwise-io/safewise-hardware

    SafeWISE hardware design

    44 partsAGPL-3.0
  • 2 layers40 × 50 mm0001 Oled Module UG-2864HSWEG01, the printed circuit board in 3D

    0001 Oled Module UG-2864HSWEG01

    memetteminarslan/0001_Oled_Module_UG-2864HSWEG01

    You are seeing a large number of widely used OLED modules in electronic development kits. More information coming soon...

    26 parts
  • 2 layers38 × 59 mmTaggerKeypadDisplay, the printed circuit board in 3D

    TaggerKeypadDisplay

    Infinitag/Hardware

    Files for the INFINITAG hardware

    35 parts6
  • 4 layers106 × 98 mmMotion control, the printed circuit board in 3D

    Motion control

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    76 parts1.4kCERN-OHL-S-2.0
  • 2 layers40.5 × 58 mmInitial v, the printed circuit board in 3D

    Initial v

    tenderlove/initial-v

    It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

    30 parts1kApache-2.0
  • 4 layers42 × 42 mmHuvud, the printed circuit board in 3D

    Huvud

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    126 parts373GPL-3.0
  • 4 layers85 × 85 mmEPS, the printed circuit board in 3D

    EPS

    rgw3d/1KCubeSat_Hardware

    Hardware design files for my $1000 CubeSat.

    657 parts158GPL-3.0

Questions

How big is the CAN Gauge PCB?

It measures 35.5 × 10.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CAN Gauge use?

77 parts, built around the SN65HVD230D, UG-2864HSWEG01 and SS16HE3_B/I. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CAN Gauge KiCad files?

From the Keith-N/STM-CAN-Gauge repository on GitHub, at the commit this page was made from: the board is Hardware/CAN_Gauge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CAN Gauge design in my own project?

Its repository states no licence, so its author keeps all rights: ask Keith-N before reusing the design.