2 layers158 × 34 mm
2 layers38 × 59 mm
TaggerKeypadDisplay
Infinitag/Hardware6Files for the INFINITAG hardware
- Size
- 38 × 59 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 28
- Pads
- 140
- Tracks, vias
- 398, 33
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Nov 2016
- Updated
- 7 Jun 2019
Overview
TaggerKeypadDisplay is an open-source printed circuit board by Infinitag, from the Infinitag/Hardware repository on GitHub. It is a 2-layer board of 38 × 59 mm with 35 parts on 28 nets, routed with 398 tracks and 33 vias.
It is built around the RT9193-3.3, UG-2864HSWEG01 and BSS138. Its parts include 8 capacitors, 6 switches, 3 diodes, 2 ICs and 2 transistors.
Main components
3
RT9193-3.3
SOT-23-5-20℃~+60℃@(Ta) 1 25uA 3.3V 300mA 35mV@(10mA)、280mV@(100mA) 75dB@(1kHz) 7V Enable Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTDSEMICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
UG-2864HSWEG01
SMD-30PUncategorisedUG
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdINFINITAG Hardware
All hardware files for the INFINITAG laser tag system
Credits
Website: http://www.infinitag.io
License
All files are published under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) License https://creativecommons.org/licenses/by-nc-sa/4.0/
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C7 |
| 4 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C8 |
| 3 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | Bildmarke_6x6mm | Infinitag:Bildmarke_6x6mm | G*** |
| 1 | JST_PH_Display | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J2 |
| 1 | JST_PH_Keypad | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J1 |
| 1 | RT9193 | RT9193-33GB:SOT94P279X129-5N | U1 |
| 1 | SJ1 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | SJ2 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | UG-2864HSWEG01 | UG-2864HSWEG01:1X30-0.7MM | U2 |
| 1 | key_back | Infinitag:Infinitag_Keypad_Button | SW5 |
| 1 | key_down | Infinitag:Infinitag_Keypad_Button | SW2 |
| 1 | key_enter | Infinitag:Infinitag_Keypad_Button | SW6 |
| 1 | key_left | Infinitag:Infinitag_Keypad_Button | SW3 |
| 1 | key_right | Infinitag:Infinitag_Keypad_Button | SW4 |
| 1 | key_up | Infinitag:Infinitag_Keypad_Button | SW1 |
The 30 most common of 35 parts.
More from Infinitag/Hardware
3- 2 layers
- 2 layers22 × 22 mm
Similar boards
- 2 layers35.6 × 33 mm
Adafruit adafruit 1 3inch 128x64 mono oled pcb adafruit 1 3in 128x64 oled stemma qt
oomlout/oomlout_oomp_project_bot_v_2
36 parts - 2 layers35.5 × 10.7 mm
- 2 layers32.1 × 37.5 mm
- 2 layers40 × 50 mm
0001 Oled Module UG-2864HSWEG01
memetteminarslan/0001_Oled_Module_UG-2864HSWEG01
You are seeing a large number of widely used OLED modules in electronic development kits. More information coming soon...
26 parts - 2 layers30 × 30 mm
- 2 layers83.3 × 92.7 mm
Flash
soniccd123/OpenDrive-Programmer
A open hardware USB programmer for the OpenDrive flashcart
48 parts6 - 4 layers60 × 40 mm
- 2 layers
Questions
How big is the TaggerKeypadDisplay PCB?
It measures 38 × 59 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TaggerKeypadDisplay use?
35 parts, built around the RT9193-3.3, UG-2864HSWEG01 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TaggerKeypadDisplay KiCad files?
From the Infinitag/Hardware repository on GitHub, at the commit this page was made from: the board is PCB/TaggerKeypadDisplay/TaggerKeypadDisplay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TaggerKeypadDisplay design in my own project?
Its repository states no licence, so its author keeps all rights: ask Infinitag before reusing the design.