2 layers47 × 20.3 mm
2 layers43.2 × 22.4 mm
OV7670 Pmod
Kampi/ZYBO11Miscellaneous things and projects for my ZYBO and ZYNQ devices.
- Size
- 43.2 × 22.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 18
- Pads
- 61
- Tracks, vias
- 120, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 May 2019
- Updated
- 30 Aug 2023
Overview
OV7670 Pmod is an open-source printed circuit board by Kampi, from the Kampi/ZYBO repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 43.2 × 22.4 mm with 18 parts on 18 nets, routed with 120 tracks and 6 vias.
Its parts include 8 diodes, 4 resistors and 3 crystals. It belongs with the fPGA and programmable logic and computers and single-board computers boards and the FPGA and CPLD boards of this library.
README
README.mdZYBO
Table of Contents
About
This repository contains several VHDL/C/Linux examples for ZYNQ devices from Xilinx which are designed for my ZYBO.
Please visit my blog when you need more information about the examples or about the projects.
Examples
This directory contains the following examples from my ZYNQ tutorial:
| Example | Description |
|---|---|
| ProcessingSystem | Simple design to learn how to use the programmable logic and the Processing System to read and write I/O by using the AXI GPIO. |
| Interrupts | Basic interrupt example to understand the ARM and programmable logic interrupt system. |
| XADC | Learn and understand how to use the integrated XADC to sample analog values. |
| FIFO | Small example how to use an AXI-Stream FIFO in interrupt and polled mode. |
| ClockingWizard | Dynamic reconfiguration example for the Clocking Wizard. |
Projects
This directory contains the following projects:
| Project | Description |
|---|---|
| DigitalAudio | A full I2S digital audio project for the FPGA and the Processing System (receiver will be added later) based on my tutorial. |
| DigitalVideo | A digital video processing project including VGA video output and OV7670 camera sensor input for the FPGA and the Processing System. |
Pmod
This directory contains different Pmods for my ZYBO (designed with KiCad).
| Pmod | Description |
|---|---|
| LED | Simple 8-bit LED output. |
| OV7670 | Pmod adapter for the Arduino OV7670 camera module. |
Maintainer
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | TestPoint:TestPoint_Pad_D1.0mm | D0, D1, D2, D3, D4, D5, D6, D7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R4 |
| 2 | 3k3 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 1 | CAMERA | Connector_PinSocket_2.54mm:PinSocket_2x09_P2.54mm_Horizontal | X3 |
| 1 | HREF | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | PCLK | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | PORT A | Digilent:Pmod-Header-2x06 | X1 |
| 1 | PORT B | Digilent:Pmod-Header-2x06 | X2 |
| 1 | VSYNC | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
More from Kampi/ZYBO
1Similar boards
- 2 layers27.9 × 16.5 mm
- 2 layers42.7 × 13.7 mm
Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm
- 2 layers44 × 51.3 mm
4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm
L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
Questions
How big is the OV7670 Pmod PCB?
It measures 43.2 × 22.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OV7670 Pmod use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OV7670 Pmod KiCad files?
From the Kampi/ZYBO repository on GitHub, at the commit this page was made from: the board is pmod/OV7670/hardware/OV7670_Pmod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OV7670 Pmod design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).