
OV7670 Pmod
Kampi/ZYBO
Miscellaneous things and projects for my ZYBO and ZYNQ devices.

Miscellaneous things and projects for my ZYBO and ZYNQ devices.
LED Pmod is an open-source printed circuit board by Kampi, from the Kampi/ZYBO repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 47 × 20.3 mm with 10 parts on 19 nets, routed with 50 tracks and 1 via.
Its parts include 8 diodes, 1 resistor and 1 crystal. It belongs with the fPGA and programmable logic and computers and single-board computers boards and the FPGA and CPLD boards of this library.
This repository contains several VHDL/C/Linux examples for ZYNQ devices from Xilinx which are designed for my ZYBO.
Please visit my blog when you need more information about the examples or about the projects.
This directory contains the following examples from my ZYNQ tutorial:
| Example | Description |
|---|---|
| ProcessingSystem | Simple design to learn how to use the programmable logic and the Processing System to read and write I/O by using the AXI GPIO. |
| Interrupts | Basic interrupt example to understand the ARM and programmable logic interrupt system. |
| XADC | Learn and understand how to use the integrated XADC to sample analog values. |
| FIFO | Small example how to use an AXI-Stream FIFO in interrupt and polled mode. |
| ClockingWizard | Dynamic reconfiguration example for the Clocking Wizard. |
This directory contains the following projects:
| Project | Description |
|---|---|
| DigitalAudio | A full I2S digital audio project for the FPGA and the Processing System (receiver will be added later) based on my tutorial. |
| DigitalVideo | A digital video processing project including VGA video output and OV7670 camera sensor input for the FPGA and the Processing System. |
This directory contains different Pmods for my ZYBO (designed with KiCad).
| Pmod | Description |
|---|---|
| LED | Simple 8-bit LED output. |
| OV7670 | Pmod adapter for the Arduino OV7670 camera module. |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | ~ | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 390R | Resistor_THT:R_Array_SIP9 | R1 |
| 1 | ~ | Digilent:Pmod-Header-2x06 | X1 |

Kampi/ZYBO
Miscellaneous things and projects for my ZYBO and ZYNQ devices.

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 47 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kampi/ZYBO repository on GitHub, at the commit this page was made from: the board is pmod/LED/hardware/LED_Pmod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).