Skip to the content
2 layers50 × 37 mmELECS3, the printed circuit board in 3D

Basta universal sensor eto

Size
50 × 37 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
12
Pads
47
Tracks, vias
60, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Apr 2026
Updated
4 Apr 2026

Overview

ELECS3 is an open-source printed circuit board by JanClyde05, from the JanClyde05/UniversalSensor repository on GitHub. It is a 2-layer board of 50 × 37 mm with 17 parts on 12 nets, routed with 60 tracks and 0 vias.

It is built around the 2N2222A. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Universal-Sensor

Basta universal sensor

Parts

17
QtyValueFootprintReferences
5R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal1k, 1k, 1k, 10k, 10k
2C_Disc_D3.0mm_W2.0mm_P2.50mmCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm0.1uF, 0.33uF
2LED_D5.0mm_ClearLED_THT:LED_D5.0mm_ClearLED, LED
12N2222A2N2222A Transistor:2N2222ABJT
178057805:78057805
1ATtiny85 ICATtiny85:ATtiny85 ICATtiny85
1BarrelJack_Kycon_KLDX-0202-xC_HorizontalConnector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_HorizontalPower Jack
1CP_Radial_D4.0mm_P2.00mmCapacitor_THT:CP_Radial_D4.0mm_P2.00mm10uF
1Relay_SPDT_Hongfa_JQC-3FF_0XX-1ZRelay_THT:Relay_SPDT_Hongfa_JQC-3FF_0XX-1ZRelay
1Screw Terminal 3 PinScrew Terminal:Screw Terminal 3 PinScrew Terminal 3 Pin
1VS1838BKY-022:KY-022IR Receiver

More from JanClyde05/UniversalSensor

3
  • 2 layers71.3 × 43.3 mmELECS Proximity, the printed circuit board in 3D

    ELECS Proximity

    JanClyde05/UniversalSensor

    Basta universal sensor eto

    24 parts2
  • 2 layers57 × 45 mmELECS Sound, the printed circuit board in 3D

    ELECS Sound

    JanClyde05/UniversalSensor

    Basta universal sensor eto

    21 parts2
  • 2 layers74.3 × 35 mmELECS3 LDR, the printed circuit board in 3D

    ELECS3 LDR

    JanClyde05/UniversalSensor

    Basta universal sensor eto

    19 parts2

Similar boards

  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 2 layers279.4 × 203.2 mmZ180GDC, the printed circuit board in 3D

    Z180GDC

    lynchaj/rhyophyre

    Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

    249 parts12
  • 2 layers99.1 × 99.1 mmQL Qsound10x10, the printed circuit board in 3D

    QL Qsound10x10

    alvaroalea/QL_QsoundQprint_clone

    A clone board of the Sound card for the Sinclair QL Computer.

    23 parts11
  • 2 layers156.5 × 67.5 mmNixieScanDisplay, the printed circuit board in 3D

    NixieScanDisplay

    profdc9/NixieClock

    A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

    106 parts10
  • 2 layers89.3 × 50 mmMM58167-ISA RTC, the printed circuit board in 3D

    MM58167-ISA RTC

    jensma-de/MM58167-ISA-RTC

    RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.

    29 parts9
  • 2 layers97.6 × 76.8 mm12f675-mppt, the printed circuit board in 3D

    12f675-mppt

    rasberryrabbit/PIC12F675MPPT

    Solar MPPT circuit.

    45 parts9GPL-3.0
  • 2 layers14.6 × 13.6 mmChip and transistor, the printed circuit board in 3D

    Chip and transistor

    gidim/e61-gauge

    An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.

    15 parts8
  • 2 layers147.2 × 58.3 mmLi IonBatteryProtection, the printed circuit board in 3D

    Li IonBatteryProtection

    cnobile2012/Li-IonBatteryProtection

    Circuit to protect Li-Ion and Li-Po batteries at the cell level.

    81 parts6MIT

Questions

How big is the ELECS3 PCB?

It measures 50 × 37 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ELECS3 use?

17 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ELECS3 KiCad files?

From the JanClyde05/UniversalSensor repository on GitHub, at the commit this page was made from: the board is ELECS3_IR/pcb/ELECS3.kicad_pcb and its schematic ELECS3_IR/pcb/ELECS3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ELECS3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask JanClyde05 before reusing the design.