Skip to the content
2 layers149.7 × 99.7 mmOptocoupler, the printed circuit board in 3D

KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.

Size
149.7 × 99.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
55
Pads
142
Tracks, vias
296, 24
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
31 Jul 2025
Updated
31 Jul 2025

Overview

Optocoupler is an open-source printed circuit board by JaVD054, from the JaVD054/PUC_project_pcb repository on GitHub. It is a 2-layer board of 149.7 × 99.7 mm with 34 parts on 55 nets, routed with 296 tracks and 24 vias.

It is built around the TLP250(F). Its parts include 12 capacitors, 12 resistors, 6 ICs and 4 connectors.

Main components

1

README

README.md

KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.

Parts

34
QtyValueFootprintReferences
12CCapacitor_THT:CP_Radial_Tantal_D5.5mm_P2.50mmC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12
12RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12
6TLP250Package_DIP:DIP-8_W7.62mmU7, U8, U9, U10, U11, U12
1Conn_01x12_SocketConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalJ4
1Conn_01x12_SocketTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-12_1x12_P5.00mm_HorizontalJ2
1Screw_Terminal_01x07TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_HorizontalJ1
1Screw_Terminal_01x14Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ3

More from JaVD054/PUC_project_pcb

1
  • 2 layers149.7 × 99.7 mmPcd, the printed circuit board in 3D

    Pcd

    JaVD054/PUC_project_pcb

    KiCad PCB project for a PUC inverter along with its driver board, designed as a single-layer layout and optimized for DIY etching.

    14 parts

Similar boards

  • 2 layers140.7 × 47.4 mmEG8010 A1, the printed circuit board in 3D

    EG8010 A1

    Millisman/EG8010

    Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)

    201 parts17MIT
  • 2 layers304.6 × 105.7 mmMPPT Booster 4kW Hardware, the printed circuit board in 3D

    MPPT Booster 4kW Hardware

    HNadeemTahir/AI_Inverter_Project

    NgSpice Digital Twin of a complete off-grid solar power system: H-Bridge inverter (220V/50Hz, PI control, electro-thermal IGBT modeling) and 4kW MPPT boost converter (UC3843 analog control, KCL summing node, gate drive…

    115 parts5
  • 2 layers95 × 72 mmBridge, the printed circuit board in 3D

    Bridge

    53175ddd/3P-VVVF

    自作三相インバータのオープンソースプロジェクト

    31 parts1
  • 2 layers182 × 84 mmBoost converter, the printed circuit board in 3D

    Boost converter

    Abineshpk007/KICAD-boost-converter-gate-pulse-from-DSP-

    This is my PCB, there are many outer like it but this is mine

    29 parts1
  • 2 layersGB2, the printed circuit board in 3D

    GB2

    Andy18650/GB2-2025-team4

    GitHub repository for Cambridge University Engineering part IIA project GB2: Electrical Power, Team 4

    167 partsGPL-3.0
  • 2 layersPCB Design Project, the printed circuit board in 3D

    PCB Design Project

    asifahmad-namal2020/PCB_Design_Project

    PCB of three phase inverter designed by Engr. Asif Ahmad

    107 parts
  • 2 layers198 × 218 mmHORNO PCB, the printed circuit board in 3D

    HORNO PCB

    Bojtronic/Horno_DGC

    Automatización de horno eléctrico

    105 parts
  • 2 layers226.2 × 263.7 mmPCB HORNO, the printed circuit board in 3D

    PCB HORNO

    Bojtronic/TFG

    Trabajo final de graduación para el grado de licenciatura en ingeniería en computadores

    254 parts

Questions

How big is the Optocoupler PCB?

It measures 149.7 × 99.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Optocoupler use?

34 parts, built around the TLP250(F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Optocoupler KiCad files?

From the JaVD054/PUC_project_pcb repository on GitHub, at the commit this page was made from: the board is optocoupler.kicad_pcb and its schematic optocoupler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Optocoupler design in my own project?

Its repository states no licence, so its author keeps all rights: ask JaVD054 before reusing the design.