Skip to the content
2 layers89 × 113.2 mmMain Magic BluePIll, the printed circuit board in 3D

Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

Size
89 × 113.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
55
Pads
172
Tracks, vias
374, 23
Pours
118
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Nov 2024
Updated
29 Nov 2025

Overview

Main Magic BluePIll is an open-source printed circuit board by JRegi, from the JRegi/MagicAlonso-LineFollower repository on GitHub, published under the MIT licence. It is a 2-layer board of 89 × 113.2 mm with 59 parts on 55 nets, routed with 374 tracks and 23 vias.

It is built around the AMS1117CD-3.3, IRLML2502 and SS14. Its parts include 15 resistors, 6 capacitors, 5 diodes, 4 ICs and 4 switches. It belongs with the robots and motor control boards of this library.

Main components

3

README

README.md

MagicAlonso - Robot dedicado a la leyenda Asturiana del automobilismo

MagicAlonso V1 (sin turbina)

imagen

Descripción

MagicAlonso es un robot seguidor de líneas de alto rendimiento con tracción y succión brushless.

Parts

59
QtyValueFootprintReferences
61kResistor_SMD:R_0603_1608MetricR2, R6, R7, R10, R11, R12
6M3MountingHole:MountingHole_3mmH1, H2, H3, H4, H11, H12
5, , , ,
4M2MountingHole:MountingHole_2.2mm_M2H7, H8, H9, H10
310kResistor_SMD:R_0603_1608MetricR1, R9, R13
3LED_BLUEMixLib:LED_0805_2012MetricD3, D4, D6
2100nFCapacitor_SMD:C_0603_1608MetricC1, C5
210uFCapacitor_SMD:C_0805_2012MetricC6, C7
1100kResistor_SMD:R_0805_2012MetricR4
1100nFCapacitor_SMD:C_0805_2012MetricC4
110UFCapacitor_SMD:C_0805_2012MetricC3
110kResistor_SMD:R_0805_2012MetricR14
11kResistor_SMD:R_0805_2012MetricR5
120kResistor_SMD:R_0805_2012MetricR16
1330Resistor_SMD:R_0805_2012MetricR8
1330kResistor_SMD:R_0805_2012MetricR3
1AMS1117CD-3.3Package_TO_SOT_SMD:TO-252-3_TabPin2U2
1BluePill_SWD_BreakoutMixLib:BluePillU1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1CN3905MixLib:Mini360_step-downU6
1ESCConnector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ5
1HC05MixLib:HC05U3
1IRLML2502Package_TO_SOT_SMD:SOT-23Q1
1LED_RGBLED_SMD:LED_RGB_5050-6D2
1MPU6050MixLib:MPU6050_ModuleJ2
1PUSH_1MixLib:SW_Push_Sw-3424p_HandsolderSW4
1PUSH_2MixLib:SW_Push_Sw-3424p_HandsolderSW2
1PUSH_3MixLib:SW_Push_Sw-3424p_HandsolderSW3
1Power_SWMixLib:SW_DPDT_SLIDE_THTSW1
1SS14Diode_SMD:D_SOD-123D1
1SensorsConnector_JST:JST_XH_S10B-XH-A_1x10_P2.50mm_HorizontalJ9

The 54 most common of 59 parts.

More from JRegi/MagicAlonso-LineFollower

6
  • 2 layers181.1 × 244 mmMain MagicAlonso rounded, the printed circuit board in 3D

    Main MagicAlonso rounded

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    412 partsMIT
  • 2 layers182.1 × 236.8 mmPrintable PCB, the printed circuit board in 3D

    Printable PCB

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    236 partsMIT
  • 2 layers113.3 × 193.9 mmMain Magic simple printable, the printed circuit board in 3D

    Main Magic simple printable

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    112 partsMIT
  • 2 layers89 × 113.7 mmMain MagicAlonso, the printed circuit board in 3D

    Main MagicAlonso

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    103 partsMIT
  • 2 layers140 × 28.6 mmSensors16 MagicAlonso, the printed circuit board in 3D

    Sensors16 MagicAlonso

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    64 partsMIT
  • 2 layers95.3 × 113.2 mmMain Magic simple, the printed circuit board in 3D

    Main Magic simple

    JRegi/MagicAlonso-LineFollower

    Repositorio dedicado al desarrollo del velocista profesional MagicAlonso.

    56 partsMIT

Similar boards

  • 2 layers100 × 100 mmPCB SALUS v3, the printed circuit board in 3D

    PCB SALUS v3

    LeoSole423/PCB_SALUS_V3

    PCB de control para el robot Ackermann SALUS. Esta revision se inspira en la arquitectura de Hoja-Base, pero usa un ESP32-S3 y se mantiene como un diseno independiente.

    91 parts
  • 2 layers130.5 × 91.1 mmRobot Main Controller V3, the printed circuit board in 3D

    Robot Main Controller V3

    manhtienvu-vn/Defensive_Robot

    Full neccessary document my team PKA-03 (Phenikaa University) used to build a defensive robot in the Vietnam Robocon competition 2025, including firmware, hardware and mechanical design.

    128 parts
  • 2 layers99.4 × 60.2 mmTeslaBMBCheck, the printed circuit board in 3D

    TeslaBMBCheck

    svpetry/TeslaBMBCheck

    Simple device that reads the voltage levels and temperatures from a Tesla Model S BMB board.

    42 parts1
  • 2 layers195.6 × 113 mmHVA, the printed circuit board in 3D

    HVA

    blue-wind-25/JxMake

    JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

    228 parts
  • 2 layers94 × 54 mmReflow master, the printed circuit board in 3D

    Reflow master

    electrodonkey/roza_reflow_hw

    Reflow controller

    102 partsMIT
  • 2 layers106.7 × 123.2 mm12VSupport, the printed circuit board in 3D

    12VSupport

    svpetry/12VSupport

    System to support a vehicle 12V electrical system with a LiIon battery to prevent the lead battery from depletion.

    97 parts
  • 2 layers65 × 41.5 mm8leds, the printed circuit board in 3D

    8leds

    eddyem/STM8_samples

    Some code samples and ready projects based on STM8 (deprecated)

    40 parts80

Questions

How big is the Main Magic BluePIll PCB?

It measures 89 × 113.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Main Magic BluePIll use?

59 parts, built around the AMS1117CD-3.3, IRLML2502 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Main Magic BluePIll KiCad files?

From the JRegi/MagicAlonso-LineFollower repository on GitHub, at the commit this page was made from: the board is pcb/main_Magic_BluePIll/main_Magic_BluePIll.kicad_pcb and its schematic pcb/ESP32_main_boards/main_Magic-simple/main_Magic-simple.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Main Magic BluePIll design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).