
Bms v1
azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.

RP2040 Development Board
Rp2040-dev board is an open-source printed circuit board by JHay0112, from the JHay0112/rp2040-dev-board repository on GitHub. It is a 4-layer board of 30 × 40 mm with 37 parts on 58 nets, routed with 281 tracks and 80 vias.
It is built around the RP2040 and TLV70233DSE. Its parts include 16 capacitors, 9 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
This repository contains a development board design for the RP2040 loosely based around the Pi Pico.
The goal of this design was to produce a development board for a common microcontroller for the purpose of demonstrating a simple PCB design. The design had to be breadboard compatible and use USB-C for programming.
The designed board (as shown below) fulfills all of these requirements.


The board was manufactured and assembled by JLCPCB, and used to blink an LED to demonstrate it is in working condition (shown below).

The design of the board could be improved by increasing pin count and reducing the width of the PCB to allow more room for breadboarding around the board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C5, C6, C7, C8, C9, C12, C13, C14 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C10, C11, C15, C16 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R8, R9 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2, J3 |
| 2 | LED_Y | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Y1 |
| 1 | BOOT_SEL | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | TLV70233 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128 | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U2 |

azerimaker/BMS_3-5S
3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.

M0LTE/pi-transceiver
An attempt to build a complete ham radio transceiver around a Raspberry Pi

kennito2035/convey
CONVEY: open 8-channel patient-isolated EEG/sEMG/ECG acquisition board (ADS1299, KiCad 10)



Fr4nkFletcher/ESP32-Marauder-Cheap-Yellow-Display
ESP32Marauder Cheap Yellow Display


It measures 30 × 40 mm and has 4 copper layers, 1.6 mm thick.
37 parts, built around the RP2040 and TLV70233DSE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JHay0112/rp2040-dev-board repository on GitHub, at the commit this page was made from: the board is rp2040_dev_board.kicad_pcb and its schematic rp2040_dev_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JHay0112 before reusing the design.