Skip to the content

TLV70233DSE

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 3.3V 300mA 35uA 375mV@(300mA) 48uVrms 5.5V 68dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown Positive WSON-6(1.5x1.5) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TLV70233DSE
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
WSON-6(1.5x1.5)
Pins
6
In stock
73 at JLCPCB (C2871361)
Used on
6 open-source boards

Overview

The TLV70233DSE is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a WSON-6(1.5x1.5) package with 6 pins. -40℃~+125℃@(Tj) 1 3.3V 300mA 35uA 375mV@(300mA) 48uVrms 5.5V 68dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown Positive WSON-6(1.5x1.5) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:TLV70215QDSERQ1, from EasyEDA) and its footprint (Package_SON:WSON-6_1.5x1.5mm_P0.5mm, from KiCad's library), ready for a KiCad board. 73 are in stock at JLCPCB (part C2871361). 6 open-source boards in 5 repositories on GitHub use it.

Symbol

1IN2GND3OUT4N/C5N/C6EN
EasyEDA_Cloud:TLV70215QDSERQ1From EasyEDA

Footprint

Package_SON:WSON-6_1.5x1.5mm_P0.5mmFrom KiCad's library

From the datasheet

13
Supply, least
2 V · IN, recommended operating min · p. 4
Supply, most
5.5 V · IN, recommended operating max · p. 4
Supply, absolute maximum
6 V · IN, absolute max · p. 4
Junction, hottest
150 °C · Operating virtual junction, absolute max · p. 4
Takes working
35 µA · Ground pin current, typical, IOUT = 0 mA · p. 5
Takes asleep
400 nA · Shutdown current, typical, VEN ≤ 0.4 V, VIN = 2 V · p. 5
Takes asleep
1 µA · Shutdown current, typical, VEN ≤ 0.4 V, VIN = 2–4.5 V, TJ = –40 to +85°C · p. 5
Gives
300 mA · Output current, recommended operating max · p. 4
Current limit
500 mA · Output current limit, typical, VOUT = 0.9 × VOUT(nom) · p. 5
Dropout
260 mV · Dropout voltage, typical, IOUT = 300 mA · p. 5
Junction to air (DSE (WSON))
321.3 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to board (DSE (WSON))
281.5 K/W · Junction-to-board thermal resistance · p. 4
Junction to case (DSE (WSON))
207.9 K/W · Junction-to-case (top) thermal resistance · p. 4

What it is and has

4
Accuracy
2% · p. 1
Protection
Thermal shutdown and overcurrent protection · p. 1
Output capacitor stability
Effective capacitance of 0.1 μF · p. 1
Undervoltage lockout
Integrated UVLO · p. 12

Around it

2
cap 1-μF
between IN and GND; Ceramic; recommended for stability and good transient performance. X5R and X7R types are recommended. · p. 3
cap 1-μF
between OUT and GND; Ceramic; needed for stability. Effective capacitance under bias and temperature must be at least 0.1 uF; maximum ESR should be less than 200 mΩ. · p. 3

Specifications

36
ParameterConditionsAs printedPage
VoltageIN; over operating junction temperature rangemin -0.3 · max 6 V4
VoltageEN; maximum is VIN + 0.3 V or 6.0 V, whichever is smallermin -0.3 · max 6 V4
VoltageOUT; over operating junction temperature rangemin -0.3 · max 6 V4
Temperature TJOperating virtual junctionmin -55 · max 150 °C4
Temperature TstgStoragemin -55 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ±2000 Vmax 2000 V4
Electrostatic discharge V(ESD)Charged device model (CDM), per JEDEC specification JESD22-C101, all pins; ±500 Vmax 500 V4
Input voltage VINOver operating free-air temperature rangemin 2 · max 5.5 V4
Output voltage VOUTFamily output voltage range; over operating free-air temperature rangemin 1.2 · max 4.8 V4
Output current IOUTOver operating free-air temperature rangemin 0 · max 300 mA4
Junction-to-ambient thermal resistance RθJADSE (WSON), 6 PINStyp 321.3 °C/W4
Junction-to-case (top) thermal resistance RθJC(top)DSE (WSON), 6 PINStyp 207.9 °C/W4
Junction-to-board thermal resistance RθJBDSE (WSON), 6 PINStyp 281.5 °C/W4
Junction-to-top characterization parameter ψJTDSE (WSON), 6 PINStyp 42.4 °C/W4
Junction-to-board characterization parameter ψJBDSE (WSON), 6 PINStyp 284.8 °C/W4
Junction-to-case (bottom) thermal resistance RθJC(bot)DSE (WSON), 6 PINStyp 142.3 °C/W4
Input voltage range VINTJ = –40°C to +125°Cmin 2 · max 5.5 V5
DC output accuracy VOUT–40°C ≤ TJ ≤ 125°Cmin -2 · typ 0.5 · max 2 %5
Line regulation ΔVOUT(ΔVIN)VOUT(nom) + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 10 mAtyp 1 · max 5 mV5
Load regulation ΔVOUT(ΔIOUT)0 mA ≤ IOUT ≤ 300 mAtyp 1 · max 15 mV5
Dropout voltage VDOVIN = 0.98 × VOUT(nom), IOUT = 300 mA; measured for devices with VOUT(nom) ≥ 2.35 Vtyp 260 · max 375 mV5
Output current limit ICLVOUT = 0.9 × VOUT(nom)min 320 · typ 500 · max 860 mA5
Ground pin current IGNDIOUT = 0 mAtyp 35 · max 55 uA5
Ground pin current IGNDIOUT = 300 mA, VIN = VOUT + 0.5 Vtyp 370 uA5
Ground pin current (shutdown) ISHDNVEN ≤ 0.4 V, VIN = 2 Vtyp 400 nA5
Ground pin current (shutdown) ISHDNVEN ≤ 0.4 V, 2 V ≤ VIN ≤ 4.5 V, TJ = –40°C to +85°Ctyp 1 · max 2 uA5
Power-supply rejection ratio PSRRVIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mA, f = 1 kHztyp 68 dB5
Output noise voltage VnBW = 100 Hz to 100 kHz, VIN = 2.3 V, VOUT = 1.8 V, IOUT = 10 mAtyp 48 uVRMS5
Start-up time tSTRCOUT = 1 uF, IOUT = 300 mA; time from EN assertion to 0.98 × VOUT(nom)typ 100 us5
Enable pin high (enabled) VEN(high)Maximum: VINmin 0.9 V5
Enable pin low (disabled) VEN(low)min 0 · max 0.4 V5
Enable pin current IENVIN = VEN = 5.5 Vtyp 0.04 uA5
Undervoltage lockout UVLOVIN risingtyp 1.9 V5
Thermal shutdown temperature TsdShutdown, temperature increasingtyp 165 °C5
Thermal shutdown temperature TsdReset, temperature decreasingtyp 145 °C5
Operating junction temperature TJmin -40 · max 125 °C5

Pins, by the datasheet

6
1 IN
Input pin; a 1-uF ceramic capacitor to ground is recommended for stability and good transient performance. · p. 3
2 GND
Ground pin. · p. 3
3 OUT
Regulated output voltage; a 1-uF ceramic capacitor to ground is needed for stability. · p. 3
4 NC
No connection; can be tied to ground to improve thermal dissipation. · p. 3
5 NC
No connection; can be tied to ground to improve thermal dissipation. · p. 3
6 EN
Enable input; above 0.9 V enables the regulator and below 0.4 V puts it into shutdown. · p. 3

Open-source boards using it

6
  • 2 layers79 × 89 mmBms v1, the printed circuit board in 3D

    Bms v1

    azerimaker/BMS_3-5S

    3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.

    175 parts22
  • 4 layers100 × 100 mmPi TX 35W PA V2, the printed circuit board in 3D

    Pi TX 35W PA V2

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    185 parts15
  • 4 layers64 × 64 mmConvey, the printed circuit board in 3D

    Convey

    kennito2035/convey

    CONVEY: open 8-channel patient-isolated EEG/sEMG/ECG acquisition board (ADS1299, KiCad 10)

    146 parts4CERN-OHL-S-2.0
  • 2 layers339.1 × 121 mmArisutea pcb, the printed circuit board in 3D

    Arisutea pcb

    mattyams/arisutea-pcb-stm32

    PCB design files for Arisutea STM32 Keyboard

    185 parts1MIT
  • 4 layers30 × 40 mmRp2040-dev board, the printed circuit board in 3D

    Rp2040-dev board

    JHay0112/rp2040-dev-board

    RP2040 Development Board

    37 parts
  • 4 layers100 × 100 mmPi TX 35W PA, the printed circuit board in 3D

    Pi TX 35W PA

    M0LTE/pi-transceiver

    An attempt to build a complete ham radio transceiver around a Raspberry Pi

    161 parts15

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV70233DSE?

Yes. The symbol is EasyEDA_Cloud:TLV70215QDSERQ1 and the footprint Package_SON:WSON-6_1.5x1.5mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV70233DSE?

WSON-6(1.5x1.5), with 6 pins. Its footprint is drawn on this page.

Where is the TLV70233DSE datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV70233DSE?

JLCPCB lists it as part C2871361, with 73 in stock; the sellers' links on this page open their listings.

What can replace the TLV70233DSE?

Parts like it in the library: the TLV70233QDSERQ1 by Texas Instruments, the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW and the ME6211C33M5G-N by MICRONE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV70233DSE?

6 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.