
Arduino socket
Iver-Iscariot/timezone-shiftregister-clock
A stackable/expandable design for a clock to show the local-time of the members of my club in different timezones

A stackable/expandable design for a clock to show the local-time of the members of my club in different timezones
Timezone shiftregister clock is an open-source printed circuit board by Iver-Iscariot, from the Iver-Iscariot/timezone-shiftregister-clock repository on GitHub. It is a 4-layer board of 40.6 × 15.9 mm with 18 parts on 50 nets, routed with 244 tracks and 86 vias.
It is built around the 74HC595 and 74HC165D. Its parts include 3 capacitors, 3 ICs, 3 connectors and 1 switch. It belongs with the lEDs and displays boards of this library.
Expandable, dynamic system for showing the time in different timezones.
Originally designed for use in Omega Verksted, as several members exchanged to different timezones.
The modules are chained together with one MCU at the end. The timezone for each module is set using the dip switch, and read to the MCU by shift registers. The corresponding numbers for 7-seg displays are then sent out on further registers. The dip-switch also instructs weather its the last in the chain, and if its supposed to show the minutes or the hours of the zone. The clock is design to be installed in two rows, one for hours and one for minutes
coming
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R_Pack04 | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN2, RN3, RN4, RN5, RN6 |
| 3 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | 74HC595 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 2 | Conn_01x06_Socket | timezoneClock:flatcable conn 6 | J3, J4 |
| 1 | 74HC165 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_DIP_x08 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | SW2 |
| 1 | ~ | timezoneClock:double digit 7 seg | DIS1 |

Iver-Iscariot/timezone-shiftregister-clock
A stackable/expandable design for a clock to show the local-time of the members of my club in different timezones

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

slu4coder/Minimal-UART-Computer-3
Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.


Windfisch/midikraken
A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

It measures 40.6 × 15.9 mm and has 4 copper layers, 1.6 mm thick.
18 parts, built around the 74HC595 and 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Iver-Iscariot/timezone-shiftregister-clock repository on GitHub, at the commit this page was made from: the board is rev1.0/rev1.0.kicad_pcb and its schematic Arduino socket/Arduino socket.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Iver-Iscariot before reusing the design.