
Timezone shiftregister clock
Iver-Iscariot/timezone-shiftregister-clock
A stackable/expandable design for a clock to show the local-time of the members of my club in different timezones

A stackable/expandable design for a clock to show the local-time of the members of my club in different timezones
Arduino socket is an open-source printed circuit board by Iver-Iscariot, from the Iver-Iscariot/timezone-shiftregister-clock repository on GitHub. It is a 2-layer board of 40.6 × 41.6 mm with 11 parts on 29 nets, routed with 91 tracks and 89 vias.
It is built around the L7805. Its parts include 4 capacitors, 3 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Expandable, dynamic system for showing the time in different timezones.
Originally designed for use in Omega Verksted, as several members exchanged to different timezones.
The modules are chained together with one MCU at the end. The timezone for each module is set using the dip switch, and read to the MCU by shift registers. The corresponding numbers for 7-seg displays are then sent out on further registers. The dip-switch also instructs weather its the last in the chain, and if its supposed to show the minutes or the hours of the zone. The clock is design to be installed in two rows, one for hours and one for minutes
coming
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x06_Socket | timezoneClock:flatcable conn 6 | J3 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | ~ | timezoneClock:DS3231 RTC module | RTC1 |

Iver-Iscariot/timezone-shiftregister-clock
A stackable/expandable design for a clock to show the local-time of the members of my club in different timezones

Allen-Synthesis/EuroPi
EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.


Tircown/ERCF-easy-brd
More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover

starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

Redherring32/OpenTendo-TopLoader
An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)
It measures 40.6 × 41.6 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Iver-Iscariot/timezone-shiftregister-clock repository on GitHub, at the commit this page was made from: the board is Arduino socket/Arduino socket.kicad_pcb and its schematic Arduino socket/Arduino socket.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Iver-Iscariot before reusing the design.