
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

Manufacturing Test support ware
ICE V Test is an open-source printed circuit board by ICE-V-Wireless, from the ICE-V-Wireless/ICE-V_MfgTest repository on GitHub, published under the MIT licence. It is a 2-layer board of 81.7 × 31.8 mm with 17 parts on 26 nets, routed with 53 tracks and 2 vias.
It is built around the MMBT3904. Its parts include 5 resistors, 2 connectors, 1 capacitor and 1 transistor.
Manufacturing Test support ware
This repo uses a local copy of Espressif's esptool so you'll need to grab
that like so:
git submodule update --initThe test binary will need to be built with your local WiFi credentials.
Firmware/ice-v_mfgtest/ directorycredentials_template.h to credentials.h and edit for your WLANidf.py build to create the binariespython/test_firmware directoryget_binaries.sh scriptThe End-user binaries are already in the python/ship_firmware directory and
don't need credentials because they can be customized at runtime.
To run the test:
ICE-V-MfgTest/python directory and run the run_test.py
script. This will execute a single pass of the automated test.A single pass of the automated test begins with an erased board with no firmware. It then performs the following operations:
If all those pass then a final success message is printed.
The board will need to be connected to the test fixture which provides proper continutity loopback for all the GPIO, as well as the battery charge load.
The test operator should be prepared to press the BOOT button at the moment when the test indicates to do so - there are 5 seconds grace before the test continues with a failure.
There should be a WiFi network available for the DUT to join. Please set up the
credentials.h file in the test firmware directory with the SSID and password.
If there is no WiFi available then that part of the test will fail.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4, H5 |
| 4 | 22 1/8W | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5 |
| 3 | CONN_02X06 | programming-jig:823-22-008-10-004101 | PMOD1, PMOD2, PMOD3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47uF 10V 0805 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Aux | programming-jig:821-22-012-10-004101 | J3 |
| 1 | Conn_01x02 | programming-jig:821-22-002-10-004101 | J1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io



iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
It measures 81.7 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ICE-V-Wireless/ICE-V_MfgTest repository on GitHub, at the commit this page was made from: the board is Hardware/ICE-V_Test/ICE-V_Test.kicad_pcb and its schematic Hardware/ICE-V_Test/ICE-V_Test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).