
USB C PD Module PANELIZED
Huruvarshan/USB-C-power-delivery-module
Repo for my USB-C power supply delivery module

Repo for my USB-C power supply delivery module
USB C PD Module is an open-source printed circuit board by Huruvarshan, from the Huruvarshan/USB-C-power-delivery-module repository on GitHub, published under the MIT licence. It is a 4-layer board of 35.6 × 20.3 mm with 23 parts on 36 nets, routed with 205 tracks and 86 vias.
It is built around the TVS2200DRV, CYPD3177-24LQXQ and TPD4E02B04DQAR, with the IRF7328TRPBF among its other parts. Its parts include 6 resistors, 5 capacitors, 4 ICs, 3 connectors and 2 diodes.
Repo for my USB-C power supply delivery module
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J3 |
| 2 | TVS2200DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2, U3 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 3u3 | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 5k1 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | CYPD3177-24LQ | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm | U4 |
| 1 | D | Diode_SMD:D_SOD-123 | D1 |
| 1 | IRF7328TRPBF | Package_SO:SO-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | LOGO | LOGO | G*** |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | TPD4E02B04DQA | Package_SON:USON-10_2.5x1.0mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | gr | LED_SMD:LED_0603_1608Metric | D2 |

Huruvarshan/USB-C-power-delivery-module
Repo for my USB-C power supply delivery module

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

OpenStickCommunity/Hardware
A collection of hardware designs by members of the OpenStickCommunity

Redherring32/100W-Charging-PCB
100W USB C PD Lithium Ion charging PCB based on the TPS25750D and BQ25713



NoxAevi/Unwired
Unwired is a project that aims to take a USB peripheral (like a mouse/keyboard) and allow you to connect to it wirelessly while simultaniously being as compact as possible because wired stuff can be pretty annoying at…


williamlin108/Olympus-BH-2-LED-Module-G031xMAX20078
Smart Microscope LED Driver based on STM32G431
It measures 35.6 × 20.3 mm and has 4 copper layers, 1.6 mm thick.
23 parts, built around the TVS2200DRV, CYPD3177-24LQXQ, TPD4E02B04DQAR and IRF7328TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Huruvarshan/USB-C-power-delivery-module repository on GitHub, at the commit this page was made from: the board is USB-C_PD_Module/v1/PCB/USB-C_PD_Module.kicad_pcb and its schematic USB-C_PD_Module/v1/PCB/USB-C_PD_Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).