

Project LED Torch
- Size
- 62.4 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 4
- Pads
- 10
- Tracks, vias
- 14, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 Jun 2025
- Updated
- 27 Jun 2025
Overview
Project LED Torch is an open-source printed circuit board by HenrikBach1, from the HenrikBach1/MyKiCadLearning repository on GitHub. It is a 2-layer board of 62.4 × 25 mm with 5 parts on 4 nets, routed with 14 tracks and 0 vias.
It is built around the CR2032. Its parts include 1 resistor, 1 diode and 1 switch.
Main components
1README
README.mdMyKiCadLearning
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CR2032 | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | SW_DPDT_x2 | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
The 4 most common of 5 parts.
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

- 4 layers188 × 188 mm

- 2 layers61 × 36.8 mm

- 2 layers59.2 × 41 mm

- 2 layers35 × 35 mm

- 2 layers90 × 89.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the Project LED Torch PCB?
It measures 62.4 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project LED Torch use?
5 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project LED Torch KiCad files?
From the HenrikBach1/MyKiCadLearning repository on GitHub, at the commit this page was made from: the board is Project LED Torch/Project LED Torch.kicad_pcb and its schematic Breadboard Power Supply/Breadboard Power Supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project LED Torch design in my own project?
Its repository states no licence, so its author keeps all rights: ask HenrikBach1 before reusing the design.