2 layers85 × 67 mm
Gaggimate
dulerabbit/GaggiBre-legacy
This is GaggiBre! a fork of Gaggimate with Manual Brew Control and Adaptive Mode. Made by Dule Rabbit
113 parts8
2 layers17 × 23 mm
Capa de Control Inferior para Rele
HefestoPrimal/Capa-Control-Inferior-ReleMini placa PCB para la parte inferior de un relevador para accionarlo directamente, cuenta con fase de potencia integrada para microcontroladores y salidas NA, C y NA del relé
- Size
- 17 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 9
- Pads
- 22
- Tracks, vias
- 25, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 21 Apr 2026
- Updated
- 25 Apr 2026
Overview
Capa de Control Inferior para Rele is an open-source printed circuit board by HefestoPrimal, from the HefestoPrimal/Capa-Control-Inferior-Rele repository on GitHub. It is a 2-layer board of 17 × 23 mm with 10 parts on 9 nets, routed with 25 tracks and 0 vias.
It is built around the 1N4148W and MMBT2222A. Its parts include 2 resistors, 2 diodes, 2 connectors, 1 transistor and 1 switch. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
2README
README.mdActivador Inferior para Relé
Esta PCB esta diseñada para soldarse directamente a la parte inferior de un relevador y manejarlo directamente con un microcontrolador a través de 2 pines de alimentación y uno de control, sumándole también 3 pines de salida correspondiente al COMUN, NORMALMENTE ABIERTO y NORMALMENTE CERRADO. Su principal ventaja es el espacio utilizado y el hecho de contar con todos los componentes para una fase de potencia que proteja al microcontrolador de corrientes parásitas generadas por el mismo relevador.
Circuito esquemático
Vista en 3D
|
|
|
Dimensiones
Redes
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D1 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 5V GND SIG | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1 |
| 1 | LED | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | LOGO | Archivos extra de huellas:Logo Mexatronica Huella 07mm | Mexatrónica |
| 1 | LOGO | Archivos extra de huellas:Relevador Icono 2mm | G*** |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | NA NC C | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
Similar boards
- 2 layers25.4 × 57.2 mm
OpenTherm Click
michpro/mikroBUS
Collection of add-on boards in mikroBUS™ standard
58 parts5CERN-OHL-P-2.0 - 2 layers68.6 × 53.3 mm
Arduino OpenTherm shield
anway0404/Arduino_OpenTherm_shield
Arduino hardware shield to send and receive data from Opentherm devices
54 parts3CERN-OHL-P-2.0 - 4 layers449.2 × 272.9 mm
Wpc power driver cost
lolz0r/Williams-WPC-Power-Driver-Board-A-12697-3
Untested, unverifed, AI created design.
453 parts2 - 2 layers105 × 90 mm
Ws uc06
wildsystems/ws-uc06
Custom ESP32-C6 development board with power input protection, relay outputs, opto-isolated I/O, NTC sensor input, and JTAG debugging. Designed as a DIY-friendly controller base.
84 parts2 - 4 layers99.9 × 99.9 mm
- 2 layers102.6 × 102.6 mm
- 2 layers68.6 × 53.3 mm
Arduino OpenTherm shield
michpro/Arduino_OpenTherm_shield
Arduino hardware shield to send and receive data from OpenTherm devices
55 parts1CERN-OHL-P-2.0
Questions
How big is the Capa de Control Inferior para Rele PCB?
It measures 17 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Capa de Control Inferior para Rele use?
10 parts, built around the 1N4148W and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Capa de Control Inferior para Rele KiCad files?
From the HefestoPrimal/Capa-Control-Inferior-Rele repository on GitHub, at the commit this page was made from: the board is Capa de Control Inferior para Rele/Capa de Control Inferior para Rele.kicad_pcb and its schematic Capa de Control Inferior para Rele/Capa de Control Inferior para Rele.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Capa de Control Inferior para Rele design in my own project?
Its repository states no licence, so its author keeps all rights: ask HefestoPrimal before reusing the design.