Skip to the content
2 layers49 × 22 mmLab4(288412), the printed circuit board in 3D

A double-sided USB-UART converter PCB designed in KiCad, featuring custom-built schematic symbol and footprint libraries.

Size
49 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
33
Pads
68
Tracks, vias
109, 7
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 Jul 2026
Updated
11 Jul 2026

Overview

Lab4(288412) is an open-source printed circuit board by GulsumnurTanyeli, from the GulsumnurTanyeli/Custom_KiCad_USB_UART_Design repository on GitHub. It is a 2-layer board of 49 × 22 mm with 8 parts on 33 nets, routed with 109 tracks and 7 vias.

It is built around the STM8AF6213PCU and FT232RL. Its parts include 3 capacitors, 2 ICs, 1 resistor and 1 connector. It belongs with the interfaces and adapters boards and the STM8 boards of this library.

Main components

2

README

README.md

Custom PCB Design with Self-Designed Component Libraries (KiCad)

This repository contains the full hardware design files for a double-sided USB-UART converter and microcontroller breakdown board. The core focus of this project was Component Library Creation from Scratch, including custom schematic symbols and footprints tailored to hardware manufacturing specifications.

Design Specifications & Library Creation

1. Custom Schematic Symbols & Footprints (LIB_288412)

A project-specific, isolated library was created to design custom parts based on official datasheets:

  • STM Microcontroller (TSSOP20): Generated using the Footprint Wizard. Footprint customized with a rectangular pad for Pin 1 and oval pads for the remaining pins. Completed with strict adherence to F.Fab, F.Silkscreen (pin 1 dot indicator), and F.Courtyard clearance layers. Integrated native 3D models.
  • USB Connector (MOLEX_USB): Manually created footprint mixing THT (Through-Hole) mechanical shields and SMD data pads based on mechanical drawings.
  • Electrical Pin Types: Strict electrical rules applied in the symbol editor; power lines mapped as power_input and data lines mapped as bi-directional to ensure clean Electrical Rules Check (ERC) execution.

2. Schematic & Circuit Routing (FT232RL)

  • USB-to-UART Bridge: Implemented the FT232RL IC following standard datasheet configurations (Schematic 7.4).
  • Hardware Configurations: Hardware pins CLK, CTS, and RTS left unconnected per requirements, with the CTS pin tied directly to Ground (GND) for stable hardware flow configuration.
  • Power Filtering & Passive Selection:
    • High-frequency noise suppression using a Ferrite Bead in an SMD 1210 package.
    • Bulk decoupling utilizing a Polarized Tantalum Capacitor in a 7360 package.
    • Local decoupling and biasing via Resistors and Non-polarized Capacitors in SMD 0805 packages.

3. PCB Layout & Manufacturing Prep

  • Layer Stackup: Double-sided PCB with tightly grouped component placement to minimize track lengths.
  • Signal Integrity: Implemented large copper Ground Polygons (GND pours) on both layers to enhance thermal dissipation and mitigate EMI.
  • Traceability: Completed with custom copper/silkscreen labels including Name, Surname, and Student Index Number.

Project Structure

  • kicad_project/: Native KiCad project files including the custom local library directories (.pretty packages).
  • visuals/: High-resolution 3D CAD visualizations and PCB layer stackup screenshots.

Parts

8
QtyValueFootprintReferences
2CCapacitor_SMD:CP_Elec_5x3.9C1, C3
1C_PolarizedCapacitor_SMD:CP_Elec_5x3C2
1FT232RL288412:TSSOP20U1
1FerriteBeadFerrite_THT:LairdTech_28C0236-0JW-10FB1
1RResistor_SMD:R_0201_0603MetricR1
1STM8AF6213Package_SO:SSOP-28_5.3x10.2mm_P0.65mmU2
1USB288412:usbJ1

Similar boards

  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers80.1 × 56.9 mmKwp1281tool, the printed circuit board in 3D

    Kwp1281tool

    mnaberez/vwradio

    Reverse engineering Volkswagen car radios

    33 parts133BSD-3-Clause
  • 2 layers45 × 69 mmUsbavrfloppy, the printed circuit board in 3D

    Usbavrfloppy

    jtsiomb/usbamigafloppy

    USB floppy controller for Amiga disks

    25 parts69CC-BY-SA-4.0
  • 2 layers100 × 71.8 mmBrutzelkarte, the printed circuit board in 3D

    Brutzelkarte

    jago85/Brutzelkarte_PCB

    Brutzelkarte - N64 Flash Cart PCB (KiCad)

    106 parts67GPL-3.0
  • 2 layers132.5 × 38 mmEmfi, the printed circuit board in 3D

    Emfi

    Ledger-Donjon/silicon-toaster

    SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:

    81 parts60LGPL-3.0
  • 2 layers22 × 66.5 mmKbxIrBlaster, the printed circuit board in 3D

    KbxIrBlaster

    kbx81/kbxIRBlaster

    ESP32-based IR MegaBlaster!

    106 parts58CC-BY-SA-4.0
  • 2 layers104.7 × 55.6 mmLab1, the printed circuit board in 3D

    Lab1

    jsjolund/dmx512-controller-board

    Controller board for DMX512 compatible devices, built around the STM32F4 processor

    96 parts26
  • 2 layers95 × 85 mmAMBE3003USB, the printed circuit board in 3D

    AMBE3003USB

    phl0/AMBE3003USB

    AMBE 3003 USB PCB

    211 parts18

Questions

How big is the Lab4(288412) PCB?

It measures 49 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lab4(288412) use?

8 parts, built around the STM8AF6213PCU and FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lab4(288412) KiCad files?

From the GulsumnurTanyeli/Custom_KiCad_USB_UART_Design repository on GitHub, at the commit this page was made from: the board is lab4(288412).kicad_pcb and its schematic lab4(288412).kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lab4(288412) design in my own project?

Its repository states no licence, so its author keeps all rights: ask GulsumnurTanyeli before reusing the design.