Skip to the content
4 layers140 × 90 mmHexapod V2, the printed circuit board in 3D

4-Layer PCB for the Arduino Hexapod

Size
140 × 90 mm
Copper layers
4
Thickness
1.6 mm
Parts
43
Nets
89
Pads
218
Tracks, vias
284, 13
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Jul 2025
Updated
30 Jul 2025

Overview

Hexapod V2 is an open-source printed circuit board by GreatMesa, from the GreatMesa/Hexapod-PCB repository on GitHub. It is a 4-layer board of 140 × 90 mm with 43 parts on 89 nets, routed with 284 tracks and 13 vias.

It is built around the WS2812B. Its parts include 7 capacitors, 4 resistors, 3 ICs and 2 connectors.

Main components

1

README

README.md

Hexapod-PCB

4-Layer PCB for the Arduino Hexapod

Introduction

This PCB is a 4-Layer hexapod for servo applications. It containes a signal layer for all the servo pwm pins and a uniform ground + power plane for the servos spesifically. The reason while I decided to go through this project is because I wanted a way that I can adjust the voltage level of the servos as depending on the voltage of the servos the speed and tourque is affected. This also will organize my wire managment by a lot since I don't have to extrapolate my electonics to a bunch of breadboards.

Goals

Here are the main goals of this PCB:

  • Make a PCB that can manage 18 seperate servos simutaneously.
  • Have uniform and stable power for all 18 servos.
  • Make calculations using a inertial sensor for inverse kinematics.
  • Use NRF protocol to communicate with a RC transmitter.
  • Have indication for the hexapod status using LEDs and a Buzzer.

PCB 3D Model

Screenshot 2025-07-20 023243

PCB Picture

Screenshot 2025-07-20 022511

Bill of Materials

Item NamePrice (USD)QuantityTotal Price (USD)Purchase Link
PCB Order$33.151$33.15Link
Teensy 4.1$37.501$37.50Link
Male Pin Header StripsOWNEDOWNEDOWNEDLink
Female Pin Header Strips$0.991$0.99Link
7.4 5200mAh Lipo$15.971$15.97Link
ACS712 Current Sensor$1.151$1.15Link
WS2812B Individual LEDs$0.411$0.41Link
SN74HCT125D$1.061$1.06Link
10pc Buzzers$0.491$0.49Link
OLED$1.971$1.97Link
Total Cost$90.72

Parts

43
QtyValueFootprintReferences
18Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalCoxa, Coxa, Coxa, Coxa, Coxa, Coxa, Femur, Femur, Femur, Femur, Femur, Femur, Tibia, Tibia, Tibia, Tibia +2
4100kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R1, R1, R2
2104 0.1μFCapacitor_SMD:C_1206_3216MetricC1, C2
216V 1mFCapacitor_THT:CP_Radial_D10.0mm_P7.50mmC4, C5
2BatteryTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1, J1
2WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmBattery LED, Status LED
1102 1nfCapacitor_SMD:C_0805_2012MetricC6
116V 22μFCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC3
150V 0.1μFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7
1ACS712xLCTR-05BPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1Aurduino Mega 2560 ProArduino Library:Clone_Mega2560_Pro_SocketA1
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1LOGOGraphics:VICTINIG***
1MPU6050usini_sensors:module_mpu6050U1
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutU2

The 39 most common of 43 parts.

More from GreatMesa/Hexapod-PCB

2
  • 4 layers203.5 × 105 mmHexapod V2, the printed circuit board in 3D

    Hexapod V2

    GreatMesa/Hexapod-PCB

    4-Layer PCB for the Arduino Hexapod

    40 parts
  • 4 layers100 × 95 mmHexapod V2, the printed circuit board in 3D

    Hexapod V2

    GreatMesa/Hexapod-PCB

    4-Layer PCB for the Arduino Hexapod

    40 parts

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 2 layers95.3 × 161.9 mmDfh badge, the printed circuit board in 3D

    Dfh badge

    tanaes/whopping_Voron_mods

    135 parts787GPL-3.0
  • 2 layers42.8 × 28.8 mmMM Skirt, the printed circuit board in 3D

    MM Skirt

    PrintersForAnts/Micron

    If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)

    11 parts741GPL-3.0
  • 2 layers149.6 × 127.1 mmErgodash, the printed circuit board in 3D

    Ergodash

    omkbd/ErgoDash

    keyboard

    187 parts732MIT
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 2 layers177.7 × 144.5 mmCOMM PANEL, the printed circuit board in 3D

    COMM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    275 parts431

Questions

How big is the Hexapod V2 PCB?

It measures 140 × 90 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Hexapod V2 use?

43 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hexapod V2 KiCad files?

From the GreatMesa/Hexapod-PCB repository on GitHub, at the commit this page was made from: the board is Hexapod V2/Hexapod V2-backups/Hexapod V2-2025-07-15_183759/Hexapod V2.kicad_pcb and its schematic Hexapod V2/Hexapod V2-backups/Hexapod V2-2025-07-06_224437/Hexapod V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hexapod V2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask GreatMesa before reusing the design.