2 layers9 × 12 mm
2 layers10.3 × 11 mm
MCU+IMU
Golf-Simulator-17/PCB-V2Second Version of repository
- Size
- 10.3 × 11 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 70
- Pads
- 136
- Tracks, vias
- 274, 33
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Nov 2023
- Updated
- 28 Nov 2023
Overview
MCU+IMU is an open-source printed circuit board by Golf-Simulator-17, from the Golf-Simulator-17/PCB-V2 repository on GitHub. It is a 2-layer board of 10.3 × 11 mm with 20 parts on 70 nets, routed with 274 tracks and 33 vias.
It is built around the STM32F091RCT6 and LSM6DSV16XTR. Its parts include 11 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
2
STM32F091RCT6
LQFP-64(10x10)-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 32KB 48MHz 52 ARM Cortex-M0 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
LSM6DSV16XTR
LGA-14-40℃~+85℃ 1.71V~3.6V 2.6uA 4.5KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±4000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C5, C6, C7, C8 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C10, C11 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | LSM6DSV16XTR | footprints:LGA14L_LSM6_STM | U1 |
| 1 | RN4871 | RF_Module:Microchip_RN4871 | U3 |
| 1 | STM32F091RCT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
More from Golf-Simulator-17/PCB-V2
1Similar boards
- 2 layers115.3 × 171.5 mm
PurdueFall2023ECE477Team2
AdenKoperczak/PurdueFall2023ECE477Team2
Code and other files for a portable Skee-Ball Machine
140 parts - 4 layers65 × 73 mm
- 2 layers60 × 64 mm
LCDPCB
Ashassins/NYAKB
ECE 477 Project: NYAKB is a multimedia keyboard with hot swappable modules
33 parts2 - 4 layers40 × 40 mm
- 2 layers141.9 × 72.9 mm
Imu to dxl 10p
jyg9/microduck-community-kit
补充microduck缺少的硬件电路和固件，另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻
897 parts28Apache-2.0 - 6 layers26 × 25 mm
Tektag
teklabsdigital/TekTag
Biosensor for telehealth, patient monitoring, fall detection, dementia geofencing and cardiograms
93 parts18 - 4 layers44.5 × 50.6 mm
- 2 layers80 × 60 mm
Questions
How big is the MCU+IMU PCB?
It measures 10.3 × 11 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MCU+IMU use?
20 parts, built around the STM32F091RCT6 and LSM6DSV16XTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCU+IMU KiCad files?
From the Golf-Simulator-17/PCB-V2 repository on GitHub, at the commit this page was made from: the board is MCU+IMU/MCU+IMU.kicad_pcb and its schematic Battery + Boost/BoostCircuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCU+IMU design in my own project?
Its repository states no licence, so its author keeps all rights: ask Golf-Simulator-17 before reusing the design.