
Triggerbox
strawlab/triggerbox
camera triggering for synchronized multi-camera setups

Cluster is an open-source printed circuit board by GheorgheAlexandru, from the GheorgheAlexandru/Speedometru repository on GitHub. It is a 2-layer board of 270 × 130 mm with 69 parts on 67 nets, routed with 637 tracks and 123 vias.
It is built around the SN74HC125D and MRA4003T3G-MS. Its parts include 13 diodes, 12 capacitors, 12 resistors, 5 connectors and 4 ICs.
Acest proiect implică proiectarea unui cluster de contor de viteza folosind KiCad, un software gratuit pentru proiectarea electronica . Clusterul de contor de viteza va afisa citirile vitezei si alte date relevante pentru aplicatiile automotive.
git clone https://github.com/GheorgheAlexandru/Speedometru.git.kicad_sch) in KiCad.Contributiile sunt binevenite! Te rog creeaza o cerere de tragere (pull request) sau trimite probleme pentru imbunatatiri sau bug-uri.
Acest proiect este autorizat sub Licenta MIT. Vezi fisierul LICENSE pentru mai multe detalii.
Pentru orice intrebari sau sugestii, simte-te liber sa ma contactezi pe GitHub: GheorgheAlexandru
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP200, TP201, TP202, TP203, TP204, TP205, TP206, TP300, TP301, TP302, TP303, TP304, TP305, TP306 |
| 12 | 1k2 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R200, R201, R202, R203, R204, R205, R300, R301, R302, R303, R304, R305 |
| 12 | LED | LED_SMD:LED_1206_3216Metric | D200, D201, D202, D203, D204, D205, D300, D301, D302, D303, D304, D305 |
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C100, C101, C201, C203, C204, C301, C303, C304 |
| 5 | MountingHole | MountingHole:MountingHole_5mm | H100, H101, H102, H103, H104 |
| 2 | 100pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C200, C300 |
| 2 | 330uF | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C202, C302 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J400, J402 |
| 2 | Conn_01x12_Pin | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J401, J403 |
| 2 | MMZ2012 | Inductor_SMD:L_0805_2012Metric | FB200, FB300 |
| 2 | VAR | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | RV200, RV300 |
| 2 | ~ | Footprint:SOP65P1030X245-55N | U200, U300 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J100 |
| 1 | MRA4003T3G | Diode_SMD:D_SMA | D100 |
| 1 | SN74HC125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | IC100 |
| 1 | SN74HC125 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | IC101 |

strawlab/triggerbox
camera triggering for synchronized multi-camera setups

sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power


X-zeed/UTAC-PCB
4-channel smart relay control board with ESP32-C3 SuperMini - KiCad PCB Design v0.2.0




Nayan9ine/Load-Control-Using-Relay-Module-and-IR-Remote
Created a load control system in which load connected to relay module is turned ON or OFF by entering a password using IR based remote. Built on arduino UNO R3 clone using CH340 chip.
It measures 270 × 130 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the SN74HC125D and MRA4003T3G-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GheorgheAlexandru/Speedometru repository on GitHub, at the commit this page was made from: the board is Vitezometru/cluster/cluster.kicad_pcb and its schematic Vitezometru/cluster/Input_Connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GheorgheAlexandru before reusing the design.