

Robot logic pcb
- Size
- 101.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 120
- Pads
- 218
- Tracks, vias
- 181, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Jan 2025
- Updated
- 21 Apr 2025
Overview
Robot logic pcb is an open-source printed circuit board by Game-Team-SLSC, from the Game-Team-SLSC/robot-logical-pcb-2025 repository on GitHub. It is a 2-layer board of 101.6 × 53.3 mm with 26 parts on 120 nets, routed with 181 tracks and 3 vias.
It is built around the XT30U-M. Its parts include 4 diodes, 3 ICs, 2 resistors, 1 capacitor and 1 fuse. It belongs with the robots and motor control boards and the ESP32 and AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdGame Team's robot pcb for Eurobot Junior 2025

Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | PH6A | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | PMV1, PMV2, PPCA1, PVL1, PVL2 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp | D3, D4 |
| 2 | PH2A | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | PMISC1, PRST1 |
| 2 | PH4A | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | PDIG1, PLCD1 |
| 2 | PH5A | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | PGRB1, PSC1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 160 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | Arduino_Mega2560_R3_Shield | PCM_arduino-library:Arduino_Mega2560_R3_Shield | A1 |
| 1 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | Led_Green | LED_THT:LED_D5.0mm | D2 |
| 1 | Led_Yellow | LED_THT:LED_D5.0mm | D1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U1 |
| 1 | PH3A | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | PCTRL1 |
| 1 | Voltage Regulator | Project:MP1584EN | VR1 |
| 1 | XIAO-ESP32-S3-DIP | Project:XIAO-ESP32S3-DIP | U2 |
| 1 | XT30U-M | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | PPWR1 |
| 1 | ~ | Project:TXB0104-BREAKOUT | U3 |
Similar boards
- 4 layers60 × 40 mm

- 2 layers45 × 80 mm

Bridge
lachlanhurst/dukki
Bipedal robot based on Microduck, rebuilt around Unitree J288 servos and a Radxa CM4.
72 parts2MIT - 4 layers112 × 90 mm

Nova pcb v6 power v2
Ace2932/Fennec
This project is a heavily modified fork of the open-source NovaSM3 quadruped, redesigned to serve as a research platform for embodied AI.
61 parts1MIT - 4 layers95 × 55 mm

- 4 layers40 × 75 mm

CUR flight computer 25-26
CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26
169 parts1 - 4 layers110 × 75 mm

MainBoard nonRJ45
Gold-Rush-Robotics/pcb_2024
A repository to store work done on PCBs for the 2024 season
85 parts1MIT - 4 layers130 × 130 mm

- 4 layers72.5 × 39.7 mm

FOC RP2350
totaldesaster/SimpleFOC-Serial-Driver
Advanced dual BLDC driver based on the RP2350 and DRV8323S ICs, designed to be controlled from a trajectory controller over RS-485, RS-422 or TTL UART. Features a compact high power design with two stacked PCBs.
68 parts1GPL-3.0
Questions
How big is the Robot logic pcb PCB?
It measures 101.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Robot logic pcb use?
26 parts, built around the XT30U-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robot logic pcb KiCad files?
From the Game-Team-SLSC/robot-logical-pcb-2025 repository on GitHub, at the commit this page was made from: the board is robot-logic-pcb.kicad_pcb and its schematic robot-logic-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robot logic pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Game-Team-SLSC before reusing the design.