2 layers100 × 55.5 mm
4 layers150 × 100 mm
Turbopump Controller
FuzzyBunnys/TurbopumpController3- Size
- 150 × 100 mm
- Copper layers
- 4
- Thickness
- 1.63 mm
- Parts
- 143
- Nets
- 139
- Pads
- 618
- Tracks, vias
- 938, 161
- Pours
- 214
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Feb 2021
- Updated
- 25 Jan 2025
Overview
Turbopump Controller is an open-source printed circuit board by FuzzyBunnys, from the FuzzyBunnys/TurbopumpController repository on GitHub. It is a 4-layer board of 150 × 100 mm with 143 parts on 139 nets, routed with 938 tracks and 161 vias.
It is built around the IRG4PF50WPBF, INA146UA and IR2130PBF, with the MCP4801-E/P, SFH617A-1 and G3VM-61VY3(TR) among its other parts. Its parts include 36 capacitors, 33 resistors, 23 diodes, 13 ICs and 12 transistors. It belongs with the RP2040 boards of this library.
Main components
7
IRG4PF50WPBF
TO-247AC-3TO-247AC-3 IGBT Transistors / Modules ROHSInfineon TechnologiesIGBT Transistors / Modules
INA146UA
SOIC-8-40℃~+85℃ 15mA 4.5V~36V 40V/us 50kHz 570uA 570uA 80dB Analog voltage gain、Fully differential、Built-in buffer Single-channel SOIC-8 Programmable / Variable Gain Amplifiers (PGA/VGA) ROHSTexas InstrumentsProgrammable / Variable Gain Amplifiers (PGA/VGA)
IR2130PBF
DIP-28-40℃~+150℃ 10V~20V 200mA 35ns 3mA 420mA 6 80ns Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET DIP-28 Gate Drivers ROHSInfineon TechnologiesGate Drivers
MCP4801-E/P
PDIP-8-40℃~+125℃ 0.125LSB、1LSB 1 2.7V~5.5V 4.5us 8 SPI PDIP-8 Digital to Analog Converters (DAC) ROHSMicrochip TechnologyDigital To Analog Converters (DAC)
SFH617A-1
DIP-4UncategorisedVishay Intertechnology
G3VM-61VY3(TR)
SOP-4-2.54mm-40℃~+110℃ 1.27V 1000MΩ 100us 150mΩ 2ms 3.75kV 30mA 60V 700mA One set normally open: 2A (SPST - normally open) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSOmronSolid State Relays (MOS Output)
J1031C12VDC.15S
插件-40℃~+85℃ 1.5ms 12V 2A 4.5ms 60V@DC、125V@AC One set changeover: 1C (SPDT - changeover) Silver + Gold Plated 插件 Signal Relays ROHSCIT Relay and SwitchSignal Relays
README
README.mdTurbopumpController
Parts
143| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C7, C14, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43, C44, C45, C46 +1 |
| 9 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C47, C48, C49, C50, C51, C52, C53, C54, C55 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16 |
| 6 | 33 | Resistor_SMD:R_0603_1608Metric | R30, R31, R32, R33, R34, R35 |
| 6 | HFA04TB60 | Package_TO_SOT_SMD:TO-263-2 | D23, D24, D25, D26, D27, D28 |
| 6 | IRG4PF50W | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Q10, Q11, Q12, Q13, Q14, Q15 |
| 5 | 330uF 100v | TpumpLib:EEV-FK2A331M | C1, C2, C3, C4, C6 |
| 4 | 1K | Resistor_SMD:R_0603_1608Metric | R8, R20, R21, R27 |
| 4 | D | Diode_SMD:D_SOD-882 | D12, D13, D14, D17 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C5, C10, C11 |
| 3 | 2.2k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12 |
| 3 | 3.9 uH | TpumpLib:PA4334.392NLT | L1, L2, L3 |
| 3 | D | Diode_SMD:D_SMA | D9, D15, D22 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H4 |
| 3 | Q_NPN_BEC | Package_TO_SOT_SMD:TSOT-23 | Q4, Q5, Q6 |
| 2 | 1.5KExxA | TpumpLib:D_SMC_Modified | D5, D10 |
| 2 | 1.5KExxA | TpumpLib:D_SMB_Modified | D6, D7 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 110 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 20K | Resistor_SMD:R_0603_1608Metric | R15, R16 |
| 2 | 8K | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | D | Diode_SMD:D_SOD-323F | D2, D3 |
| 2 | J1031C12VDC.15S | Relay_THT:Relay_SPDT_HsinDa_Y14 | K1, K2 |
| 2 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SFH617A-1 | TpumpLib:4-SMD Gullwing | U1, U2 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 150K | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 20 | TpumpLib:3361P-1-200GLF | RV1 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 3.9n | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | 4018 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U15 |
| 1 | 4046 | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm | U13 |
| 1 | 4049 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U14 |
| 1 | 470K | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 5K | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 9.1K | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | Conn_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Conn_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J2 |
| 1 | Conn_01x04 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J8 |
| 1 | Conn_01x09 | TpumpLib:Castellated_Tpump_Connector | J5 |
| 1 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J4 |
| 1 | D_Bridge_+-AA | TpumpLib:RDBF32-13 | D4 |
| 1 | D_Bridge_+-AA | TpumpLib:KMB25S | D1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123F | D8 |
| 1 | G3VM-61VY3 | Package_SO:SO-4_4.4x4.3mm_P2.54mm | U4 |
| 1 | INA146 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U6 |
| 1 | IR2130 | Package_SO:SOIC-28W_7.5x18.7mm_P1.27mm | U18 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D11 |
| 1 | LM7805_TO220 | Package_TO_SOT_SMD:SOT-223 | U16 |
| 1 | LM7815_TO220 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U17 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP4801 | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm | U5 |
| 1 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H3 |
| 1 | PC367N2J | TpumpLib:PC367NJ0000F | U3 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U12 |
| 1 | Q_NMOS_DSG | TpumpLib:DMTH10H003SPSW-13 | Q3 |
| 1 | Sense | TpumpLib:Shunt_Res | R28 |
| 1 | Sense | Resistor_SMD:R_2512_6332Metric | R36 |
More from FuzzyBunnys/TurbopumpController
1Similar boards
- 2 layers85 × 85 mm
- 2 layers100 × 99.4 mm
ThorDriveInverter ProtoV0
Omar-Magdy0/Proto_V0
The controller board enables BLDC motor control using ATmega328P and supports BEMF zero-crossing sensorless operation.
149 parts - 4 layers68 × 68 mm
Backbone
andreapiccini/spaghettilab-community
SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.
212 parts10 - 2 layers100 × 60 mm
- 2 layers56.4 × 94.2 mm
- 4 layers
Ceilingpuck v3 final v0-2
nate922/ceilingpuck_v4
Ceiling Puck v4 - smart ceiling sensor/actuator
115 parts - 2 layers
TMS IGBT And Gate Drive
zmcginty/OpenTMS
Open-Source Transcranial Magnetic Stimulator. High energy pulse circuitry, simple controllers, and coil design.
42 parts20 - 2 layers198 × 218 mm
Questions
How big is the Turbopump Controller PCB?
It measures 150 × 100 mm and has 4 copper layers, 1.63 mm thick.
What parts does the Turbopump Controller use?
143 parts, built around the IRG4PF50WPBF, INA146UA, IR2130PBF and MCP4801-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Turbopump Controller KiCad files?
From the FuzzyBunnys/TurbopumpController repository on GitHub, at the commit this page was made from: the board is Turbopump Controller/Turbopump Controller.kicad_pcb and its schematic Turbopump Controller - LCD Interface/MCU-Pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Turbopump Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask FuzzyBunnys before reusing the design.