Skip to the content
12345678

MCP4801-E/P

Microchip TechnologyExtended

-40℃~+125℃ 0.125LSB、1LSB 1 2.7V~5.5V 4.5us 8 SPI PDIP-8 Digital to Analog Converters (DAC) ROHS

Part id
microchip/MCP4801-E/P
Category
Digital To Analog Converters (DAC)
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C640385)
Used on
10 open-source boards

Overview

The MCP4801-E/P is a digital To Analog Converter made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+125℃ 0.125LSB、1LSB 1 2.7V~5.5V 4.5us 8 SPI PDIP-8 Digital to Analog Converters (DAC) ROHS.

PCBKit's library has its KiCad symbol (Analog_DAC:MCP4801, from KiCad's library) and its footprint (Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C640385). 10 open-source boards in 9 repositories on GitHub use it.

Symbol

1Vdd2CS3SCK4SDI5LDAC6SHDN7Vss8Vout
Analog_DAC:MCP4801From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

8
The pins of the MCP4801-E/P
PinNameType
1VddPower in
2CSInput
3SCKInput
4SDIInput
5LDACInput
6SHDNInput
7VssPower in
8VoutOutput

Open-source boards using it

10See all 10
  • 2 layers60 × 126.6 mmV3 Connector + IRLED, the printed circuit board in 3D

    V3 Connector + IRLED

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    151 parts439GPL-2.0
  • 2 layers49.5 × 49.5 mmProgrammableLM317, the printed circuit board in 3D

    ProgrammableLM317

    cellularmitosis/ProgrammableLM317

    A TTL-serial programmable LM317 voltage voltage supply circuit board design.

    29 parts3MIT
  • 2 layers100 × 99 mmIsItOpen, the printed circuit board in 3D

    IsItOpen

    UnHolds/FsInf-Control

    62 parts2
  • 2 layers53 × 37 mmPCB for STM32, the printed circuit board in 3D

    PCB for STM32

    Nizario04/PCB_for_STM32

    28 parts
  • 2 layers58 × 47 mmTP1, the printed circuit board in 3D

    TP1

    ZHANGENSEA/TP_Systemes_microcontroleurs

    3DN

    27 parts
  • 2 layers60 × 100 mmV3 Connector Only, the printed circuit board in 3D

    V3 Connector Only

    PiTracLM/PiTrac

    Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)

    65 parts439GPL-2.0
  • 2 layers25 × 200 mmQuantizer, the printed circuit board in 3D

    Quantizer

    telec16/modular-synth

    Little side project, don't expect much updates.

    42 parts16

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MCP4801-E/P?

Yes. The symbol is Analog_DAC:MCP4801 and the footprint Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MCP4801-E/P?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the MCP4801-E/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the MCP4801-E/P?

JLCPCB lists it as part C640385, with 0 in stock; the sellers' links on this page open their listings.

What can replace the MCP4801-E/P?

Parts like it in the library: the TLC5615CN by HGSEMI, the MCP4921-E/P by Microchip Technology, the MCP4822-E/P by Microchip Technology and the TLV5618AIP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MCP4801-E/P?

10 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.