
CableTester
FoxyHawk/cableTester
Basic RJ-12 and RJ-45 cable tester using KiCad, NS-468 upgraded

Basic RJ-12 and RJ-45 cable tester using KiCad, NS-468 upgraded
SideBoard is an open-source printed circuit board by FoxyHawk, from the FoxyHawk/cableTester repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 20 parts on 10 nets, routed with 29 tracks and 0 vias.
It is built around the RJ45. Its parts include 18 diodes and 2 connectors.
Basic cable tester.
Using https://github.com/FoxyHawk/std_lib_SRC
Status :
| Components | Description | Quantity |
|---|---|---|
| CD4017 | Decimal Counter | 1 |
| PN2222A | Transistor | 9 |
| LED | 2.2V 20mA | 9 |
| 1N4148 | Diode | 1 |
| Switch DIP-2 | Switch | 1 |
| Resistors | ... | 18 |
| RJ-12 connect | 1 | |
| RJ-45 connect | 1 |
| Components | Description | Quantity |
|---|---|---|
| LED | 2.2V 20mA | 9 |
| 1N4148 | Diode | 9 |
| RJ-12 connect | 1 | |
| RJ-45 connect | 1 |
| Components | Description | Quantity |
|---|---|---|
| PN2222A | Transistor | 2 |
| LED | 2.2V 20mA | 1 |
| Resistors | ... | 6 |
| Capacity | ... | 1 |
Test design Test ClockBoard or change trigger+integrator or NE555 timer
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | std_lib_SRC:Diode | D2, D4, D6, D8, D10, D12, D14, D16, D18 |
| 9 | LED | std_lib_SRC:LED_D5.0mm | D1, D3, D5, D7, D9, D11, D13, D15, D17 |
| 1 | RJ12 | std_lib_SRC:RJ_12 | J2 |
| 1 | RJ45 | std_lib_SRC:RJ45_8_Shield | J1 |

FoxyHawk/cableTester
Basic RJ-12 and RJ-45 cable tester using KiCad, NS-468 upgraded

FoxyHawk/cableTester
Basic RJ-12 and RJ-45 cable tester using KiCad, NS-468 upgraded

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project


Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems

mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
20 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FoxyHawk/cableTester repository on GitHub, at the commit this page was made from: the board is SideBoard/SideBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).