
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

BAEmacropad is an open-source printed circuit board by FionaCutler, from the FionaCutler/BAEmacropad repository on GitHub. It is a 2-layer board of 81 × 42.9 mm with 11 parts on 8 nets, routed with 67 tracks and 2 vias.
It is built around the WS2812B. Its parts include 3 diodes, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A macropad with one Backwards L-shaped enter. This uses the Steelseries G6 v2 configuration with a horizontal stabilizer like a standard ANSI enter and a rod stabilizer at the top. It also has three WS2812B LED indicator lights.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3 |
| 1 | MX-NoLED | MX_Alps_Hybrid:MX-2.25U-NoLED | MX1 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro-ZigZag | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW1 |
The 6 most common of 11 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 81 × 42.9 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FionaCutler/BAEmacropad repository on GitHub, at the commit this page was made from: the board is BAEmacropad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask FionaCutler before reusing the design.