

MBARETECHmini
- Size
- 174 × 176.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 162
- Nets
- 51
- Pads
- 714
- Tracks, vias
- 690, 0
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Mar 2024
- Updated
- 16 Oct 2024
Overview
MBARETECHmini is an open-source printed circuit board by Feraqc, from the Feraqc/Mbaretech-PCB repository on GitHub. It is a 2-layer board of 174 × 176.2 mm with 162 parts on 51 nets, routed with 690 tracks and 0 vias.
It is built around the ESP32-S3-DEVKITC-1-N8R2. Its parts include 42 resistors, 12 switches and 6 ICs. It belongs with the ESP32 boards of this library.
Main components
1README
README.mdMbaretech-PCB
Parts
162| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2, R3, R3, R3, R3 +14 |
| 18 | , , , , , , , , , , , , , , , +2 | ||
| 12 | 1Ok | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R6, R6, R6, R6, R6, R7, R7, R7, R7, R7, R7 |
| 6 | BATT | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Battery1, Battery1, Battery1, Battery1, Battery1, Battery1 |
| 6 | BUCK_3V3 | Mbaretech_buckConverter:Buck-Converter | BUCK1, BUCK1, BUCK1, BUCK1, BUCK1, BUCK1 |
| 6 | DIP | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | DIP1, DIP1, DIP1, DIP1, DIP1, DIP1 |
| 6 | ESP32-S3-DEVKITC-1-N8R2 | ESP32-S3-DEVKITC-1-N8R2:XCVR_ESP32-S3-DEVKITC-1-N8R2 | U1, U1, U1, U1, U1, U1 |
| 6 | IMU | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | IMU1, IMU1, IMU1, IMU1, IMU1, IMU1 |
| 6 | IR1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | IR1, IR1, IR1, IR1, IR1, IR1 |
| 6 | IR2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | IR2, IR2, IR2, IR2, IR2, IR2 |
| 6 | IR3 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | IR3, IR3, IR3, IR3, IR3, IR3 |
| 6 | KS | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | KS1, KS1, KS1, KS1, KS1, KS1 |
| 6 | LS1 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | LS1, LS1, LS1, LS1, LS1, LS1 |
| 6 | LS2 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | LS2, LS2, LS2, LS2, LS2, LS2 |
| 6 | MA | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | MA1, MA1, MA1, MA1, MA1, MA1 |
| 6 | MA PWR | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MotorA1, MotorA1, MotorA1, MotorA1, MotorA1, MotorA1 |
| 6 | MB | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | MB1, MB1, MB1, MB1, MB1, MB1 |
| 6 | MB PWR | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | MotorB1, MotorB1, MotorB1, MotorB1, MotorB1, MotorB1 |
| 6 | SW1 | SPDT_SlideSwitch:tht | SW1, SW1, SW1, SW1, SW1, SW1 |
| 6 | SW2 | SPDT_SlideSwitch:tht | SW2, SW2, SW2, SW2, SW2, SW2 |
More from Feraqc/Mbaretech-PCB
1- 2 layers100 × 100 mm

Similar boards
- 4 layers135 × 84 mm

Stepper with TMC2209 controller board V1
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
95 parts2 - 2 layers200 × 130 mm

Esp32s3 wmlta
riezky-gitH/SIMPAS-BOILER
> 📖 Guidebook proyek — tautan guidebook baru akan ditambahkan di sini.
129 parts2MIT - 2 layers91.5 × 90.5 mm

Project Kratos- W2 Q2 -ESP32-S3 Devkit Breakout Board
arkadasgupta07/ProjectKratos
Arka Dasgupta BITS Pilani, K. K. Birla Goa Campus Aspiring to develop rovers by engineering their electronics, controls and automation subsystems.
26 parts1 - 2 layers100 × 50 mm

- 4 layers100 × 79 mm

ESP32 Interface
dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.
114 parts1LGPL-2.1 - 2 layers85.4 × 100 mm

- 2 layers126.2 × 143.6 mm

Sciencepcb
Sidbit08/ABEX_PCB_v1
A custom ESP32-S3-based PCB designed in KiCad for automated soil sample analysis, featuring drivers and interfaces for environmental sensors, peristaltic pumps, and auger drilling actuators.
100 parts1 - 2 layers102 × 45 mm

HELPStat V2
stevfu/eis_capstone
Utilization of Electrochemical Impedance Spectroscopy for the Detection of Drugs
51 parts1MIT
Questions
How big is the MBARETECHmini PCB?
It measures 174 × 176.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MBARETECHmini use?
162 parts, built around the ESP32-S3-DEVKITC-1-N8R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MBARETECHmini KiCad files?
From the Feraqc/Mbaretech-PCB repository on GitHub, at the commit this page was made from: the board is MBARETECHmini_PCB/MBARETECHmini_PCB/MBARETECHmini.kicad_pcb and its schematic MBARETECH.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MBARETECHmini design in my own project?
Its repository states no licence, so its author keeps all rights: ask Feraqc before reusing the design.