4 layers
4 layers
- Copper layers
- 4
- Thickness
- 1.65 mm
- Parts
- 7
- Nets
- 7
- Pads
- 20
- Tracks, vias
- 21, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 May 2025
- Updated
- 29 Jun 2025
Overview
Bme680 is an open-source printed circuit board by Faradworks, from the Faradworks/BlocksInReview repository on GitHub. It is a 4-layer board with 7 parts on 7 nets, routed with 21 tracks and 0 vias.
It is built around the BME680, CC0603KRX7R9BB104 and CGA0603X7R106K100JT, with the 1N4148WS among its other parts. Its parts include 2 capacitors, 2 resistors, 1 IC and 1 diode.
Main components
4
BME680
LGA-8-40℃~+85℃ 0.12hpa 0.6hpa 1.3pa/K 1.71V~3.6V 150nA 30Kpa~1.1bar I2C、SPI Temperature Sensor LGA-8 Pressure Sensors ROHSBosch SensortecPressure Sensors
CC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCGA0603X7R106K100JT
060310V 10uF X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSHREMultilayer Ceramic Capacitors MLCC - SMD/SMT
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
README
README.mdBlocksInReview
Parts
7More from Faradworks/BlocksInReview
12- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
- 4 layers
Similar boards
- 4 layers71 × 129 mm
Core
Panda-Intelligence/panda-standard-board
The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…
208 parts - 2 layers70 × 70 mm
SensactUp4
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
147 parts4Apache-2.0 - 2 layers0.5 × 31.1 mm
- 2 layers20 × 50.2 mm
OBJEX DoorSensor v1.2
electronet-au/Smart-DoorWindow-sensor
Open source Smart door/window sensor. ESP32-C3 based with a custom power latch to obtain a deep sleep mode current of (30-60nA).
82 parts12CERN-OHL-W-2.0 - 4 layers118 × 117 mm
Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 4 layers44 × 48.1 mm
- 4 layers119 × 63.2 mm
OpenChordM1
FugLong/OpenChord
An open-source music device for portable, expressive, and extensible audio creation.
75 parts3MIT - 2 layers45 × 100 mm
Walkiepcb
houseofthe051010/ESP32-Walkie-Talkie-V2
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.
93 parts1
Questions
What parts does the Bme680 use?
7 parts, built around the BME680, CC0603KRX7R9BB104, CGA0603X7R106K100JT and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bme680 KiCad files?
From the Faradworks/BlocksInReview repository on GitHub, at the commit this page was made from: the board is bme680/bme680.kicad_pcb and its schematic ams1117-3.3/ams1117-3.3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bme680 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Faradworks before reusing the design.