Skip to the content
4 layersMicro sd, the printed circuit board in 3D
Copper layers
4
Thickness
1.65 mm
Parts
10
Nets
9
Pads
33
Tracks, vias
31, 10
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 May 2025
Updated
29 Jun 2025

Overview

Micro sd is an open-source printed circuit board by Faradworks, from the Faradworks/BlocksInReview repository on GitHub. It is a 4-layer board with 10 parts on 9 nets, routed with 31 tracks and 10 vias.

It is built around the TF-01A, CC0603KRX7R9BB104 and CGA0603X7R106K100JT. Its parts include 7 resistors and 2 capacitors.

Main components

3

README

README.md

BlocksInReview

Parts

10
QtyValueFootprintReferences
747KLibrary:R_0603_1608MetricR1, R2, R3, R4, R5, R6, R7
10.1uFLibrary:C_0603_1608MetricC2
110uFLibrary:C_0603_1608MetricC1
1TF-01ALibrary:TF-01AMICRO_SD1

More from Faradworks/BlocksInReview

12
  • 4 layersEsp32-s3, the printed circuit board in 3D

    Esp32-s3

    Faradworks/BlocksInReview

    34 parts
  • 4 layersTmc2209, the printed circuit board in 3D

    Tmc2209

    Faradworks/BlocksInReview

    25 parts
  • 4 layersBno055, the printed circuit board in 3D

    Bno055

    Faradworks/BlocksInReview

    15 parts
  • 4 layersLm324drg4, the printed circuit board in 3D

    Lm324drg4

    Faradworks/BlocksInReview

    11 parts
  • 4 layersMcp9808, the printed circuit board in 3D

    Mcp9808

    Faradworks/BlocksInReview

    11 parts
  • 4 layersBme680, the printed circuit board in 3D

    Bme680

    Faradworks/BlocksInReview

    7 parts
  • 4 layersLm2662m, the printed circuit board in 3D

    Lm2662m

    Faradworks/BlocksInReview

    7 parts
  • 4 layersPa1616s, the printed circuit board in 3D

    Pa1616s

    Faradworks/BlocksInReview

    7 parts
  • 4 layersDs3231, the printed circuit board in 3D

    Ds3231

    Faradworks/BlocksInReview

    4 parts
  • 4 layersMcp3008, the printed circuit board in 3D

    Mcp3008

    Faradworks/BlocksInReview

    3 parts

Similar boards

  • 4 layers71 × 129 mmCore, the printed circuit board in 3D

    Core

    Panda-Intelligence/panda-standard-board

    The current product is the Panda Standard 4.7-inch parallel E0470A01-family single-board engineering design, with a replaceable 2050mAh LCO battery pack (323576) and a finished-device maximum thickness of 7mm, including…

    208 parts
  • 4 layers100 × 68 mmDevKit, the printed circuit board in 3D

    DevKit

    kaminaris/GigaESC

    209 parts47
  • 4 layers64 × 77 mmOBSPro, the printed circuit board in 3D

    OBSPro

    FabianSchwartau/OBSPro

    Version of the OpenBikeSensor hardware optimized for PCBA

    131 parts3LGPL-2.1
  • 6 layers90 × 89 mmModular processing board, the printed circuit board in 3D

    Modular processing board

    igorwolfs/modular-processing-hw

    MCU Breakout board with Hirose BM28B connector

    177 parts1
  • 2 layers35.9 × 62.7 mmRp2040-memcard, the printed circuit board in 3D

    Rp2040-memcard

    sd2psx/pcb

    The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

    60 parts241
  • 2 layers145.7 × 107.8 mmTRS IO++, the printed circuit board in 3D

    TRS IO++

    apuder/TRS-IO

    TRS-IO gives a TRS-80 Model 1/III online capabilities and provides access to a variety of services. TRS-IO currently features the following capabilities:

    104 parts75GPL-3.0
  • 4 layers66.4 × 66.4 mmRera, the printed circuit board in 3D

    Rera

    fdiwth/tvc-drone

    This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.

    140 parts34GPL-3.0
  • 6 layers100 × 120 mmAstra piNas, the printed circuit board in 3D

    Astra piNas

    jlcjak/astra_piNas

    Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.

    176 parts30

Questions

What parts does the Micro sd use?

10 parts, built around the TF-01A, CC0603KRX7R9BB104 and CGA0603X7R106K100JT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Micro sd KiCad files?

From the Faradworks/BlocksInReview repository on GitHub, at the commit this page was made from: the board is micro_sd/micro_sd.kicad_pcb and its schematic ams1117-3.3/ams1117-3.3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Micro sd design in my own project?

Its repository states no licence, so its author keeps all rights: ask Faradworks before reusing the design.