

RGT6 core module
A minimal system runs MicroPython using STM32F405RGT6
- Size
- 49.5 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 68
- Pads
- 177
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 7 Sep 2017
- Updated
- 8 Sep 2017
Overview
RGT6 core module is an open-source printed circuit board by FE3C61AD329B, from the FE3C61AD329B/RGT6 repository on GitHub. It is a 2-layer board of 49.5 × 20.3 mm with 75 parts on 68 nets.
It is built around the WS2812B. Its parts include 45 connectors, 13 resistors, 9 capacitors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
1README
README.mdEmbedded Glue
A minimal system runs MicroPython using STM32F405RGT6
Designed in KiCAD, free to use in any application.
Pics
PCB preview in KiCAD
Actual PCB
And the size of its stencil

Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | CONN_01X01_FEMALE | Wire_Pads:SolderWirePad_single_0-8mmDrill | J3, J10, J11, J12, J13, J14, J15, J18, J19, J23, J24, J25, J26, J27, J28, J41 +6 |
| 5 | 4k7 | Resistors_SMD:R_0603 | R8, R9, R10, R11, R12 |
| 4 | ADCs | Wire_Pads:SolderWirePad_single_0-8mmDrill | J16, J20, J21, J22 |
| 4 | IOs | Wire_Pads:SolderWirePad_single_0-8mmDrill | J29, J30, J39, J40 |
| 3 | jtag | testpoint:testpoint | J42, J43, J44 |
| 2 | 100k | Resistors_SMD:R_0603 | R2, R7 |
| 2 | 18p | Capacitors_SMD:C_0603 | C3, C4 |
| 2 | 22 | Resistors_SMD:R_0603 | R5, R6 |
| 2 | 2p2 | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | 2u2 | Capacitors_SMD:C_0603 | C5, C6 |
| 2 | 560 | Resistors_SMD:R_0603 | R3, R4 |
| 2 | DACs | Wire_Pads:SolderWirePad_single_0-8mmDrill | J37, J38 |
| 2 | usart RX | Wire_Pads:SolderWirePad_single_0-8mmDrill | J32, J36 |
| 2 | usart TX | Wire_Pads:SolderWirePad_single_0-8mmDrill | J31, J35 |
| 1 | 100n | Capacitors_SMD:C_0603 | C8 |
| 1 | 1k | Inductors_SMD:L_0603 | L1 |
| 1 | 220 | Resistors_SMD:R_0603 | R13 |
| 1 | 300 | Resistors_SMD:R_0603 | R1 |
| 1 | 32.768khz | Crystals:Crystal_SMD_0603-2pin_6.0x3.5mm | Y2 |
| 1 | 4u7 | Capacitors_SMD:C_0603 | C7 |
| 1 | 8Mhz | Crystals:Crystal_SMD_0603-2pin_6.0x3.5mm | Y1 |
| 1 | C | Capacitors_SMD:C_0603 | C9 |
| 1 | DIODE | Diodes_SMD:D_0603 | D1 |
| 1 | GND | Wire_Pads:SolderWirePad_single_0-8mmDrill | J4 |
| 1 | MCP1703A-4002_SOT23 | TO_SOT_Packages_SMD:SOT-23 | U2 |
| 1 | STM32F405RGTx | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_REED_CT05-XXXX-J1 | SW1 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Vertical_Molex-105133-0001 | J2 |
| 1 | WS2812B | LEDs:LED_WS2812B-PLCC4 | LED1 |
| 1 | a3v3 | testpoint:testpoint | J1 |
| 1 | do not use | Wire_Pads:SolderWirePad_single_0-8mmDrill | J17 |
| 1 | uart4 RX | Wire_Pads:SolderWirePad_single_0-8mmDrill | J34 |
| 1 | uart4 TX | Wire_Pads:SolderWirePad_single_0-8mmDrill | J33 |
More from FE3C61AD329B/RGT6
3- 2 layers49.5 × 22.9 mm

- 2 layers51.8 × 20.3 mm

- 2 layers

Similar boards
- 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm

Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm

- 2 layers95.3 × 161.9 mm

- 2 layers42.8 × 28.8 mm

MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm

- 2 layers285.5 × 95 mm

- 2 layers177.7 × 144.5 mm

Questions
How big is the RGT6 core module PCB?
It measures 49.5 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RGT6 core module use?
75 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RGT6 core module KiCad files?
From the FE3C61AD329B/RGT6 repository on GitHub, at the commit this page was made from: the board is RGT6_core_module/backup.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RGT6 core module design in my own project?
Its repository states no licence, so its author keeps all rights: ask FE3C61AD329B before reusing the design.