Skip to the content
4 layers59 × 18 mmSTM32WLE5 RF dongle, the printed circuit board in 3D

STM32WLE5 RF dongle

FBS93/STM32WLE5_RF_dongle9

Compact RF dongle designed for wireless communication through USB.

Size
59 × 18 mm
Copper layers
4
Thickness
1.57 mm
Parts
70
Nets
74
Pads
289
Tracks, vias
633, 126
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Nov 2024
Updated
25 Oct 2026

Overview

STM32WLE5 RF dongle is an open-source printed circuit board by FBS93, from the FBS93/STM32WLE5_RF_dongle repository on GitHub. It is a 4-layer board of 59 × 18 mm with 70 parts on 74 nets, routed with 633 tracks and 126 vias.

It is built around the STM32WLE5C8U6, SKY13453-385LF and DLFCV-1000+, with the FT230XS-R, TLV75533PDBVR-MS and USBLC6-2SC6 among its other parts. Its parts include 33 capacitors, 11 resistors, 8 connectors, 5 ICs and 4 diodes. It belongs with the radio and wireless boards and the STM32 boards of this library.

Main components

9

README

README.md

STM32WLE5 RF dongle

RF Wizard artwork

The STM32WLE5 RF dongle is a compact USB-controlled laboratory Sub-GHz radio built around the STM32WLE5C8U6 MCU. This repository brings together the hardware and software designs developed using V-model methodology.

STM32WLE5 RF dongle frontSTM32WLE5 RF dongle back
STM32WLE5 RF dongle frontSTM32WLE5 RF dongle back

The project is developed using the Embedded Workbench template.

Highlights

  • 150–960 MHz RF range through one bidirectional, half-duplex RF port.
  • LoRa and FSK/GFSK transmit and receive, plus MSK/GMSK and BPSK transmit configuration.
  • Packet TX/RX, LoRa channel-activity detection, continuous wave and preamble TX, radio calibration, and diagnostics.
  • USB Virtual COM Port control with COBS-framed commands and CRC-16/XMODEM integrity.
  • Event-driven target software architecture.

Usage

The STM32WLE5 RF dongle has two usage methods:

  • Direct USB: Commands sent directly over the USB connection.
  • CLI: Command-line interface tool that abstracts the direct USB commands.

Documentation

Parts

70
QtyValueFootprintReferences
8100nF1_capacitor_SMD:C_0402_1005MetricC2, C3, C6, C7, C11, C28, C29, C31
433pF1_capacitor_SMD:C_0402_1005MetricC8, C9, C10, C16
4S0941-46R60_RF_shield_clip:S0941-46RJ3, J4, J5, J6
310KΩ0_resistor_SMD:R_0402_1005MetricR1, R7, R8
3220pF1_capacitor_SMD:C_0402_1005MetricC22, C23, C25
34,7uF1_capacitor_SMD:C_1206_3216MetricC1, C17, C30
347pF1_capacitor_SMD:C_0402_1005MetricC12, C32, C33
210nF1_capacitor_SMD:C_0402_1005MetricC4, C24
210uF1_capacitor_SMD:C_1206_3216MetricC26, C27
2270Ω0_resistor_SMD:R_0402_1005MetricR5, R6
227Ω0_resistor_SMD:R_0402_1005MetricR9, R10
2340Ω0_resistor_SMD:R_0402_1005MetricR2, R11
11,2pF1_capacitor_SMD:C_0402_1005MetricC13
1100Ω0_resistor_SMD:R_0402_1005MetricR4
110pF1_capacitor_SMD:C_0402_1005MetricC14
11400Ω/1GHz2_inductor_SMD:L_0402_1005MetricFB1
115uH2_inductor_SMD:L_0805_2012MetricL1
11nF1_capacitor_SMD:C_0402_1005MetricC19
11uF1_capacitor_SMD:C_0603_1608MetricC5
1220nF1_capacitor_SMD:C_0402_1005MetricC18
1220Ω0_resistor_SMD:R_0402_1005MetricR3
1470nF1_capacitor_SMD:C_0603_1608MetricC15
147nF1_capacitor_SMD:C_0402_1005MetricC20
156nH2_inductor_SMD:L_0402_1005MetricL2
1600Ω/100MHz2_inductor_SMD:L_0805_2012MetricFB2
168pF1_capacitor_SMD:C_0402_1005MetricC21
19V 200mA6_fuse_SMD:0ZCM0020FF2GF1
1Conn_01x02_Pin300_pin_header_connector:PinHeader_1x02_P2.54mm_VerticalJ1
1DLFCV-1000+50_RF_filter:DLFCV-1000+FL1
1DXW21HN5011BL5_balun_SMD:DXW21HN5011BLT1
1ECS-TXO-25CSMV20_oscillator:ECS-TXO-25CSMVY1
1FT230XS-R103_SSOP_package:SSOP-16_FT230XS-RU4
1LOGO1000_user_silk_drawings:RF_WizardG***
1Rx LED Green3_LED_SMD:LED_0402_1005MetricD4
1SKY13453-385LF55_RF_switch:SKY13453-385LFU2
1SMA_142-0701-801_EdgeMount200_coaxial_connector:SMA_142-0701-801_EdgeMountJ7
1STM32WLE5C8U6100_QFN_package:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm_ThermalViasU1
1TLV75533PDBVR105_SOT_package:SOT-23-5U5
1TVS 6.5VWM 15.5VC4_diode_SMD:D_0402_1005MetricD2
1Tx LED Blue3_LED_SMD:LED_0402_1005MetricD3
1USBLC6-2SC6105_SOT_package:SOT-23-6U3
1USB_male_typeA_2.0210_USB_connector:USB_male_typeA_2.0_1-1734028-1J8
1User LED Red3_LED_SMD:LED_0402_1005MetricD1
1cortex-M_debug_connector_10pin220_cortex-M_debug_connector:FTSH-105-01-F-D-KJ2

Similar boards

  • 4 layers98 × 98 mmAvionics Solar Panel Z-, the printed circuit board in 3D

    Avionics Solar Panel Z-

    cmu-argus/Avionics-Solar-Panel-Z-

    Solar panel board for Z- face.

    144 parts1
  • 4 layers60 × 40 mmFast SiPM Photodetector, the printed circuit board in 3D

    Fast SiPM Photodetector

    hannesduske/Fast_SiPM_Photodetector

    An open-hardware SiPM photodetector with integrated low-noise amplifier, single-photon resolution, and temperature sensing for active thermal control.

    80 parts1CERN-OHL-P-2.0
  • 4 layers41.8 × 49.6 mmECG, the printed circuit board in 3D

    ECG

    DynamicWhiteHat/Rebound

    Low-Cost Dysphagia Patch for Post-Stroke Patients

    120 parts
  • 2 layers114.1 × 30 mmFpga baluns, the printed circuit board in 3D

    Fpga baluns

    hughmor/hughmor.github.io

    My personal Github Pages website

    55 parts
  • 4 layers89.5 × 29 mmMeshnode, the printed circuit board in 3D

    Meshnode

    hansgaensbauer/polkadot

    A low cost LoRa mesh network using STM32 and the SX1276

    88 parts32
  • 2 layers16 × 47 mmMini tracker, the printed circuit board in 3D

    Mini tracker

    PTR-projects/PTR_tracker_hardware

    75 parts10
  • 6 layers30 × 60 mmFlight Computer, the printed circuit board in 3D

    Flight Computer

    Pioneer-Rocketry/Flight-Computer

    Pioneer Rocketry’s latest generation flight computer for high power, STM32-based avionics system designed for experimental high-power rockets.

    116 parts2
  • 4 layers100 × 95.1 mmMain PCB v2, the printed circuit board in 3D

    Main PCB v2

    ICRS/SSL-2024

    188 parts1Apache-2.0

Questions

How big is the STM32WLE5 RF dongle PCB?

It measures 59 × 18 mm and has 4 copper layers, 1.57 mm thick.

What parts does the STM32WLE5 RF dongle use?

70 parts, built around the STM32WLE5C8U6, SKY13453-385LF, DLFCV-1000+ and FT230XS-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32WLE5 RF dongle KiCad files?

From the FBS93/STM32WLE5_RF_dongle repository on GitHub, at the commit this page was made from: the board is hw/KiCad/STM32WLE5_RF_dongle.kicad_pcb and its schematic hw/KiCad/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32WLE5 RF dongle design in my own project?

Its repository states no licence, so its author keeps all rights: ask FBS93 before reusing the design.