
Encabulator
imad-drs/mini_encabulator_PCB
A complete PCB design exercise demonstrating schematic capture, component selection, and board layout using KiCAD. This project implements a simple LED blinker with user-controllable blink rate.

Ecao4 miniencabulator is an open-source printed circuit board by Ethancao123, from the Ethancao123/ECESeniorDesign repository on GitHub. It is a 2-layer board of 48 × 40 mm with 17 parts on 12 nets, routed with 61 tracks and 17 vias.
It is built around the ATTINY85-20SU, LM1117MP-5.0 and MBR0520. Its parts include 5 connectors, 3 resistors, 2 capacitors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 1k | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | R3 |
| 1 | ATtiny85-20S | Package_SO:SOIC-8W_5.3x5.3mm_P1.27mm | U1 |
| 1 | BUTTON | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | ISP | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1 |
| 1 | LED | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J4 |
| 1 | LM1117MP-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | MBR0520 | Diode_SMD:D_SOD-123 | D1 |
| 1 | POT | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 1 | Vin | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |

imad-drs/mini_encabulator_PCB
A complete PCB design exercise demonstrating schematic capture, component selection, and board layout using KiCAD. This project implements a simple LED blinker with user-controllable blink rate.
![[netid] miniencabulator, the printed circuit board in 3D](/embed/boards/anandpraj/Mini-Encabulator-PCB-Design.jpg?size=s&soon)
anandpraj/Mini-Encabulator-PCB-Design
This simple device only does two things: ● Blinks an LED when the user holds down a button. ● Sets blink rate proportional to potentiometer position.


NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition

SherpaModular/RawWaves
Raw Waves is a eurorack synthesizer module that plays RAW or WAV sample files from a micro SDcard. It is a derivate work of "Radio Music" from Tom Whitwell. Raw Waves is released under a CC-by-SA 3.0 license.

aNThiCu/AirsoftETU
The code for a airsoft MOSFET board that includes the trigger , active break mode and semi-auto,full-auto detection.

adarwoo/modbus_relay
A modbus RTU relay board with 3 relays for the CNC. This uses the ASX framework

chithigun23/ANUFS-BSPD-2026
ANUFS's BSPD for 2026 Formula SAE ICE Car. The goal of this project is to be AEC-Q100/Q101/Q200 compliant.
It measures 48 × 40 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ATTINY85-20SU, LM1117MP-5.0 and MBR0520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ethancao123/ECESeniorDesign repository on GitHub, at the commit this page was made from: the board is ecao4_miniencabulator/ecao4_miniencabulator.kicad_pcb and its schematic ecao4_miniencabulator/ecao4_miniencabulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ethancao123 before reusing the design.