
Encabulator
imad-drs/mini_encabulator_PCB
A complete PCB design exercise demonstrating schematic capture, component selection, and board layout using KiCAD. This project implements a simple LED blinker with user-controllable blink rate.
![[netid] miniencabulator, the printed circuit board in 3D](/embed/boards/anandpraj/Mini-Encabulator-PCB-Design.jpg)
This simple device only does two things: ● Blinks an LED when the user holds down a button. ● Sets blink rate proportional to potentiometer position.
[netid] miniencabulator is an open-source printed circuit board by anandpraj, from the anandpraj/Mini-Encabulator-PCB-Design repository on GitHub. It is a 2-layer board of 52.1 × 47.6 mm with 17 parts on 17 nets, routed with 98 tracks and 0 vias.
It is built around the ATTINY85-20SU, LM1117-5.0 and MBR0520. Its parts include 5 connectors, 3 resistors, 2 capacitors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This simple device only does two things: ● Blinks an LED when the user holds down a button. ● Sets blink rate proportional to potentiometer position.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1 µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J1 |
| 1 | BUTTON | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | LED | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J4 |
| 1 | LM1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MBR0520 | Diode_SMD:D_SOD-123 | D1 |
| 1 | POT | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J5 |
| 1 | Vin | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J2 |

imad-drs/mini_encabulator_PCB
A complete PCB design exercise demonstrating schematic capture, component selection, and board layout using KiCAD. This project implements a simple LED blinker with user-controllable blink rate.




michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)


freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
It measures 52.1 × 47.6 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ATTINY85-20SU, LM1117-5.0 and MBR0520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the anandpraj/Mini-Encabulator-PCB-Design repository on GitHub, at the commit this page was made from: the board is [netid]_miniencabulator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask anandpraj before reusing the design.