2 layers17.8 × 52 mm Kicad project, the printed circuit board in 3D

Kicad project

A board with dual optical endstops, meant to allow for greater homing speeds for large machines

Size: 17.8 × 52 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 16
Nets: 16
Pads: 54
Tracks, vias: 95, 5
Routed: Yes
KiCad: KiCad 4
Created: 9 Sep 2016
Updated: 9 Sep 2016

Overview

Kicad project is an open-source printed circuit board by Duckle29, from the Duckle29/Dual-optical-endstop repository on GitHub. It is a 2-layer board of 17.8 × 52 mm with 16 parts on 16 nets, routed with 95 tracks and 5 vias.

It is built around the FDN339AN, ITR9606 and JUMPER3. Its parts include 6 resistors, 2 transistors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

README

README.md

Dual-optical-endstop

Category and platform

AVR (ATmega, ATtiny)

Project files

Show this board on your page

https://pcbkit.io/boards/Duckle29/Dual-optical-endstop

The board's own page, for a message or a post.

Source

Repository: Duckle29/Dual-optical-endstop
Board file: kicad_project/V1.kicad_pcb
Commit: 55bb317
Licence: Not stated

Parts

Qty	Value	Footprint	References
2	100R	Resistors_SMD:R_0603_HandSoldering	R3, R6
2	10K	Resistors_SMD:R_0603_HandSoldering	R2, R5
2	47R	Resistors_SMD:R_0603_HandSoldering	R1, R4
2	FDN339AN	TO_SOT_Packages_SMD:SOT-23_Handsoldering	Q1, Q2
2	ITR9606	optical:ITR9606	OSw1, OSw2
2	JUMPER3	Jumpers:Solder-jumper-12NC-23NO	JP1, JP2
1	ATTINY85-S	Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm	U1
1	CONN_02X03	Pin_Headers:Pin_Header_Angled_2x03	P1

The 14 most common of 16 parts.

Similar boards

2 layers
Proto traparduino
gerbaud-design/KiCAD-gerbaud-design
all the KiCAD files for gerbaud design products and libraries
90 parts
4 layers65 × 52 mm
ProtogenControllerV1
coelacant1/Protogen-Electronics
SmartMatrix SmartLED Shield breakout for Protogen hardware
77 parts8GPL-3.0
2 layers86.7 × 97.3 mm
Pulsr panel
Duckle29/pulsr
A simple tiny PCB for handling the high peak currents of periodically firing a solenoid
231 parts1MIT
2 layers46 × 20 mm
Hand pnp
Duckle29/hand_pnp_connecter
Small connection board for handheld Pick n Place machine
16 parts
2 layers86.4 × 41.9 mm
Rpi shutdown v0
Duckle29/RPi-power-controller
A power controller board, meant to softly shutdown a raspberry pi, before removing power completely from a machine.
19 partsMIT
2 layers30 × 62 mm
WiFIR
Duckle29/WiFIR
A WiFi connected IR blaster to control heatpumps
34 partsBSD-3-Clause
2 layers60 × 62 mm
Power monitor
Hal9k-dk/Access-System
Files for the different parts of Hal9ks access systems for different tools.
21 parts
2 layers88 × 53 mm
Pcb
WiFIR/pcb
The design files for the WiFIR PCB
40 partsBSD-3-Clause

Questions

How big is the Kicad project PCB?

It measures 17.8 × 52 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Kicad project use?

16 parts, built around the FDN339AN, ITR9606 and JUMPER3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Kicad project KiCad files?

From the Duckle29/Dual-optical-endstop repository on GitHub, at the commit this page was made from: the board is kicad_project/V1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Kicad project design in my own project?

Its repository states no licence, so its author keeps all rights: ask Duckle29 before reusing the design.